looking for a power steering pump
looking for a power steering pump
hey wassup guys.. im tryin 2 find a powersteering pump..the pump i need is the rb20det pump right? that should hook up fine in the 240 right? does any1 have an extra pump i can buy off them? thanks
-
NISMO_RB25
- Posts: 1066
- Joined: Thu Nov 06, 2003 4:40 am
- Car: 1992 240SX with RB25DET, 1987 RX-7 TII
I don't know the answer about the RB20DET pump hooking up in the 240. I know my RB25DET pump hooked up to the 240 lines, but I don't know they are the same.
Something that might help you:Cam from night7racing.com said in one of his post that he was running without a powersteering pump (he capped the lines). This means that he may have a spare pump to sell you. Also he and the other motor importers that post on this forum can probably get you a pump if they don't already have one. You might try:night7racing.comdragdriftautox.commckinneymotorsports.com
Give them a call, I bet they can help you out. I haven't bought anything from night7 yet, but I have bought RB stuff from DDX and mckinney and I would highly recommend them. I am sure one of the 3 should be able to get you what you need.
You could always cap your lines and go manual steering.
Something that might help you:Cam from night7racing.com said in one of his post that he was running without a powersteering pump (he capped the lines). This means that he may have a spare pump to sell you. Also he and the other motor importers that post on this forum can probably get you a pump if they don't already have one. You might try:night7racing.comdragdriftautox.commckinneymotorsports.com
Give them a call, I bet they can help you out. I haven't bought anything from night7 yet, but I have bought RB stuff from DDX and mckinney and I would highly recommend them. I am sure one of the 3 should be able to get you what you need.
You could always cap your lines and go manual steering.
-
Toms240420
- Posts: 199
- Joined: Mon Sep 15, 2003 2:57 pm
- Car: My car
-
NISMO_RB25
- Posts: 1066
- Joined: Thu Nov 06, 2003 4:40 am
- Car: 1992 240SX with RB25DET, 1987 RX-7 TII
RB20... S13 pump won't work. It won't even fit in the bracket. You need an RB20 pump.
But your lines will work, if you make them. They should have the correct size banjo fittings. If not, you could always go to http://www.bakerprecision.com and order some fittings and lines to make your own custom braided stainless lines.
But your lines will work, if you make them. They should have the correct size banjo fittings. If not, you could always go to http://www.bakerprecision.com and order some fittings and lines to make your own custom braided stainless lines.
-
frosted flakes
- Posts: 410
- Joined: Tue May 13, 2003 9:02 am
- Contact:
go to http://www.skylinesaustralia.com , sell section their are probly some R32 GTST parting out
