Looking at a couple of things!

[Eighty9s13]

Im slowly starting turbo project, my Q was, Does JWT make an ECU for my needs? Say I call them and tell them my set up, they would build me an ECU?Or is anyway tuning with an SAFC2?and where can I pick up an oilsandwhich and oil lines?

[Craving4Boost]

briefly, JWT does not build ECU's. they take your stock ECU and solder on a chip with an added tune to match your added specifications; Scott from Enthalpy offers this as well. You can give them a list of what they need to tune for: turbo, cams, injectors, MAF etc. You can use an SAFC by itself but make sure you have your timing figured out past 8psi of boost. In my opinion, a rom tune, such as JWT or Enthalpy, plus a SAFC is the ultimate combo for the average joe

[sunnys14]

what about msd BTM + safc2? isnt that also good for the average joe too?

[Craving4Boost]

indeed indeed....and a whole lot cheaper too

[reu]

i saw the oil lines and sandwiches on good ol ebaythe sanwich runs about 50 shipped and the oil lines vary in price and turbo ap if i remember correctly?!