list of parts needed for 5 lug conversion?

[sileightysomeday]

i've seen tons of S14 5lugs at salvage yards, what i'd like to know is , what parts do i need to do the 5 lug conversion on a '90 S13? i know i need the hubs, but that's about it. none of the search topics give me a comprehensive list. thanks.

[sean8564]

Front Hubs and spindles Rear Hubs 5 lug rotors Z32 brakes if you want and rims

[Nismochick240]

I'm bringing back an old thread. (silly me) It has the question that I'm asking, but not the exact answer. What about the breaks? Will the s13 stock brakes not work or could I use s14 brakes? If I have to use the z32 brakes, will I need brake lines, calipers, brake pads.... I am looking for a COMPLETE list for this stuff. I wish someone would do a write-up for a sticky on this. there are 10 pages of stuff to go through when you search lol. Thanks guys!

[TrueSlide]

List for the front taken from AZ240sx.org

z32 Calipers - can be located at various junkyards (rebuild is highly recommended)Rotor - make sure you get the correct rotor for the calipers - if your 240sx is 4lug the rotors will need to be drill 4x114.3Custom Brake Lines - many 240sx related store will carry them ie. srswap.com, pdm-racing.com, clearcorners.comBrake Pads - use an oem shim kitbrake fluid

[Nismochick240]

rotors- do i have to redrill. what about just getting oem s14 se rotors?

[TrueSlide]

5 Lug conversion, take from AZ240sx.org

for S13

S14SE/Z32nonturbo rear hubs

Option 1) JDM aftermarket front S13 5 lug hubs

Option 2) S14 SE front hubs + S14 spindle + S14 ball joint w/LCA (and redrilling of strut for larger strut bolt

s14 se and 300zx have the same lug pattern, but the 300 uses alot bigger rotors.

If you are keeping the 4 lug, you have to redrill.

[Nismochick240]

no i'm wanting the 5 lug, not just a brake upgrade

[Nismochick240]

do have the link where you are looking i searched "5 lug" and "5 lug conversion" and didnt really get the info you are giving me! thanks a lot!!!!!

[TrueSlide]

http://az240sx.org/faq.html

http://www.nissanperformancema...240sx/

http://www.sportcompactcarweb....ilvia/

[Nismochick240]

totally didnt see the FAQ thanks a lot!!!!

[struckinc]

are the j30 hubs and spindles the same as the z32? could these be used for the swap parts also?