List of bushings, by part number, for refurbrishing 1994 Q45a suspension?

[Busbin]

A while back in the archives I found a list of bushings for rebuilding a G50 suspension, and used the list to procure all the parts from IOS for both my '90 and '93 Q45's.

So now I want to do the same for my '94 Q45a, but so far have not find such a list in the archives. Joe at IOS sent me some jpeg's on the Q45a suspension, and it took me a while just to spec the part numbers for new end links for a Q45a rear bar to add to my '90. So I figure several hours of analyzing those exploded views trying to track down all the rubber parts in a Q45a suspension.

Thus said, does anyone have a prepared list of bushing part numbers for refurbishing a '94 Q45a suspension? Or can you guide me as to where to look?

And for the real guru's on this subject, from your experience, are there suspension parts that may not require replacement, and should be inspected first?

I also will be removing the accumulators for recharging with Keith Bowers, but that's another post!

Thanks, Jim in the mountains of western NC

[96Qowner]

Over the past four years, and after reading most posts in the archives, I don't recall anyone posting a specific list for the ACTSUS. Keith probably would have the best knowledge, if you don't want to search the diagrams yourself.

[maxnix]

http://www.infinitipartsusa.com

Call Joe.