lean at idle

[Frankenstien93]

my car is running lean at an idle all i have done is put in my KADE and put a 255 walbro pump in and i put 360cc injectors in but i didnt have a safc so it would flood itself out so i swapped back the 260cc would my car have some how tried to lean out the 360's and that carried over to the 260's causing the lean running?

[98240]

What are you using to control fuel? I am guessing you have a wideband.

[Frankenstien93]

no unfortunatly i do no have a wideband or a a/f controller i ran out of funds (hence putting back in the 260's) i have the walbro pump and a rrfpr running 8 psi i have a a/f gauge to just roughly show what im at but its pegged at lean i was going to try to unplug ther batt to reset the sytem unless there could be another reason why is running lean. oh yea plus i think its lean because when i pulled the spark plugs there is sort of a white resin/powder on the arc above the diode and ive been told that from running lean.

[Frankenstien93]

does anyone think that unplugging the batt. for a little bit would "wiped the memory" or the 360cc?

[SSS]

Wait, you don't have ANY wideband numbers and are only going on what a crappy NB gauge is telling you?

Just replace your O2 sensor.