Kouki Tail light wiring?
I dont know that anyone has made an actual diagram. I believe the wires are the same colors. Just cut the connector off your shiny expensive new lights, get a set of pigtails from the salvage yard, (or cut yours up) a little solder and heat shrink tubing, and you will be set.Tell you what, I will go outside and check.
Okay, I took a peek. If you are refering to the S13 kouki tails, the chassis harness starts off with assorted red wires. There is a small white 3 prong connector on the light housings. At this connector the wires turn assorted greens into the respective light housings.The connector on the new tails is different and depending on how clean you want your install, not gonna be used. I cut this connector off. I obtained another set of connectors from a local salvage yard, cut the end with about 2" of wiring. Enough slack to solder this onto the kouki strand, plugged it in and checked the connection.All you are gonna do is match up your greens. Green with white stripe to green w/ white stripe etc etc etc.
Re: (gumby74)
Cool deal man thanks now I am off to find the connectors