Kouki S14 Spoiler bolt pattern?

[Jbravos14]

I have a stock wing on my s14 and i would like to put the kouki square wing on it. I am just wondering if the bolt patterns will fit with the stock wing so i dont have to drill new holes. THANKS GUYS

[Kckouki]

No they dont, you will have to drill new holes. I think 2 might work, someone back me up.

[574-240sx]

2 holes towards the rear part of the lid are the same.

[NSR240sxe]

does anyone have pics or more info?? I'm considering doing the same thing...

[Kckouki]

Im also thinking on doing it once I find an oem wingless trunk, and get some more money.

[Jbravos14]

If I put a kouki wing on the stock holes will there still be some holes that you can see or do i need to buy a stock trunk with no holes. THANKS

[574-240sx]

SE deck lid is fine. I think you would want to weld up the holes you don't need and drill out the others you do need.

[NSR240sxe]

SE deck lid is fine. I think you would want to weld up the holes you don't need and drill out the others you do need.

I'd definitely seal up the old holes, but does the japanese wing cover the mounting points from the US spoiler? Just trying to gauge if I'd need to get the trunk deck lid resprayed due to visible patching of the stock mounting holes.

[PowerGrid06]

I'd definitely seal up the old holes, but does the japanese wing cover the mounting points from the US spoiler? Just trying to gauge if I'd need to get the trunk deck lid resprayed due to visible patching of the stock mounting holes.

somebody please help i am doing the same thing and i dont want to paint my lid anymore.

[nsrZ32]

^ yeah....does anybody have any info on this?

[S-14boy]

I will be finding out here soon. I have my spoiler, Kouki front and Rear bumper getting ready to be done. They look really close, I have looked at the gasket and compared... A wise word to all about the fiberglass spoilers, becarful and make sure they are not cracked when they are shipped, I had a buddy sign off from the freight co. and realized the spoiler was cracked when I go home and inspected it and now have a cracked spoiler. But regardless of this the spoiler would have required additional body work due to molding marks and mars. I am not too distraught because i have a friend at a body shop fixing it for free, but still sucks that it was damaged in shipping.

[nsrZ32]

Sorry to hear about your spoiler. Definitely take pictures and document fitment and modifications needed to install the japanese spoiler on an SE US trunk deck lid.

[Jbravos14]

when you put the kouki wing on your car Please Post with pictures from start to finish . THANKS

[ddgsxr504]

Dun Dun Dun Dah!! I am here to answer all of your JDM tyte aero questions.

I have personally installed both Zenki Navan and Kouki Wings on to SE S14's

On both the Navan and Kouki wings the rear two holes on the SE trunk lid are the same as the JDM wings. You need to re-drill the two forward holes to accept the new wings.

Also... yes the JDM spoilers will cover the stock SE spoiler holes. All I did was cut out a square piece of thick electrical tape and cover the holes then put the NAVAN wing on with double sided 3M tape and bolt her down.

I wish I had pics to elaborate but I promise this is how it is.

[PowerGrid06]

Thanks for the info.i was looking on ebay for a spoiler but i was not home when it ended and i didnt get it. This suck because it was black, and i dont think that i would have to paint it. is 300 bucks a good price for oem k wing

[ddgsxr504]

Thanks for the info.i was looking on ebay for a spoiler but i was not home when it ended and i didnt get it. This suck because it was black, and i dont think that i would have to paint it. is 300 bucks a good price for oem k wing

$300 is a little pricey, I paid $140 for my NAVAN, keep looking...

Try this place.... http://www.pandagarage.com

[CleanSfourteen]

I'd just like to add that Navan = beautiful

And i agree that $300 is steep for a spoiler, tho i've even seen some really good $50 knock-offs... i wouldnt expect more than $150 for OEM unless you're really getting screwed on shipping

[ddgsxr504]

F it.... threadjack!!

[S-14boy]

Im trying to take my spoiler off to check the bolt patterns, but how in the world do you get it off. I took the 4 nuts off, and it seems to be glued on or something. I dont see where there could be anyother bolts.

[ddgsxr504]

double sided 3M tape there buddy.... just give it a nice big yank,

Put some M A N behind it.

[S-14boy]

Yeah, just wanted to make sure, I dont want to put some M A N behind it and pull two nuts through the trunk, lol.

[PowerGrid06]

i dont like the NAVAN ones i want the K wing and they are really expensive if they are oem.
Modified by PowerGrid06 at 6:57 PM 2/16/2007

[ddgsxr504]

i dont like the NAVAN ones i want the K wing and they are really expensive if they are oem.

That's cool that you don't like them, they look like @ss on Kouki's, they were made for the Zenki's, also you aren't looking hard enough for a K wing if you are willing to pay 3 benji's for it.

[Jbravos14]

THANKS

[S-14boy]

Guess what?!?!?! It does not cover the OEM SE holes!!!! I test fitted today, and I was dissapointed, only one hole lines up.

[Jbravos14]

THANKS sTILL LOOKS GOOD

[ddgsxr504]

Oh well Kouki's suck anyway... ha ha ha, J/K

Seriously I thought it did cover the holes, oh well I suck at life but it looks good, just get it painted now.

[PowerGrid06]

This sucks people. I dont want to repaint my trunk.

[S-14boy]

I dont either, and I dont want to spend money on patching the trunk. So I may just buy a new CF deck lid, but would still want it painted.

[ddgsxr504]

This sucks people. I dont want to repaint my trunk.

You don't have to, just get those little rubber inserts that cover the hole for now.