knock sensor pin

[WeldingHank]

which pin on the ECU is the knock sensor input? i need to know ASAP so i can wire up the sensor.

[Loofee95SE]

pin # 23 if u look from the connector it's 3rd 1 on the top role from the center of the connector. it's white wire a lil bigger then the other1s. let me know if i can help. C

[euroboy]

how come my pin 23 was a green with white patches?maybe it was the wrong one?!but i was sure i got the right one though

[WeldingHank]

thank you!

[Bizz]

The wire leading into the pin was green/white? Can you follow it all the way from the sensor?

[euroboy]

no i cannot since i don't have the clip anymorei just know that the wire comming off pin 23 is green/white

[WeldingHank]

i found it as an all white wire. i have a pin-out guide from an aussie site and the 2 wires below it match up with the pin-out guide on the aussie site as going to the check-connector, and sure enough they were 2 that i had cut from the gauge culster harness.

[mikeh16]

i found it as an all white wire. i have a pin-out guide from an aussie site and the 2 wires below it match up with the pin-out guide on the aussie site as going to the check-connector, and sure enough they were 2 that i had cut from the gauge culster harness.

Hey I know its been awhil, but do you still remember which site that was, and if you do can you link it?

Thanks,Mike

[c-rad]

Hey I know its been awhil, but do you still remember which site that was, and if you do can you link it?

Thanks,Mike

http://www.users.bigpond.com/w...s.htm

[mikeh16]

Thanks, I appreciate it!

[float_6969]

You get a cookie for searching! Thank you!