Keyless Entry

[andyklaus]

I have a 1995 Q45 and recently bought another keyless entry device. I wonder if anyone can give me the instructions for programming the darn thing. I would really appreciate the help.

[96Qowner]

While sitting inside the vehicle:1. Open the trunk.2. Close and lock all doors.3. Insert and remove the key from the ignition six times within 10 seconds.4. Manually unlock and lock driver's door once to enable "setting" mode.5. Push lock button on the new remote controller once, just long enough to hear it beep, within 5 seconds of completing step 4.6. If additional remotes are needed (up to 3), repeat steps 4 and 5 for each additional remote immediately after programming the first remote. (Note: a total of four (4) remotes can be programmed to function on the same vehicle).

[Burnsey]

I have a 1995 Q45 and recently bought another keyless entry device. I wonder if anyone can give me the instructions for programming the darn thing. I would really appreciate the help.

you should have bought mine i have for sale

[maxnix]

A remote?

[Burnsey]

zerothread/194979

^ yes a keyless entry module, that's to my for sale thread on it.