key fob

[1995Q45havoc]

my buddy wrecked his q45 and i have the same car as he once did so he gave me his key fob...is there anyway to program it to my car or do i have to take it to the dealer advice well appreciated

[elwesso]

instructions are on Q45.org

[goody90q45]

An example of Q45 voodoo, but it works. (from Q45.org)

SERVICE PROCEDUREWhile sitting inside the vehicle:1. Open the trunk.2. Close and lock all doors.3. Insert and remove the key from the ignition six times within 10 seconds.4. Manually unlock and lock driver's door once to enable "setting" mode.5. Push lock button on the new remote controller once, just long enough to hear it beep, within 5 seconds of completing step 4.6. If additional remotes are needed (up to 3), repeat steps 4 and 5 for each additional remote immediately after programming the first remote. (Note: a total of four (4) remotes can be programmed to function on the same vehicle).For additional information, please refer to page BF-38 of the 1993 and 1994 J30 Service Manuals; page BF-17 of the 1993 G20 Service Manual Supplement; and page EL-148 of the 1994 Q45 Service Manual.

[1995Q45havoc]

i just wanna say that your the man ive been wantting to program that fob for so long took me only 2 times thanks