KADE stroke length
KADE stroke length
Anyone with an FSM handy able to tell me what the stroke length on a KADE is?nm found it in another forum
Ok, great thats what I found as well. Also, anyone know how to use the formula: CR=Displacement(1cyl)+CCV+HGV+DHV-PDV --------------------------------------------- CCV+HGV+DHV-PDV
CCV=combustion chamber volumePDV=piston dome volumeDHV=deck height volumeHGV=head gasket volume
The numbers I came up with were:CCV=.596 literPDV=.12 liter (the SOHC pistons Im using have a slight deck on them)DHV= I used 0 for it because im not sure and most cars dont have any.HGV=.006liter (used 1mm compressed estimate)Displacement of 1 cyl. .6 liter
Do those sound right? If they are the number I came up with was 2.244 how do I convert this into a compression ratio that I am familiar with.
CCV=combustion chamber volumePDV=piston dome volumeDHV=deck height volumeHGV=head gasket volume
The numbers I came up with were:CCV=.596 literPDV=.12 liter (the SOHC pistons Im using have a slight deck on them)DHV= I used 0 for it because im not sure and most cars dont have any.HGV=.006liter (used 1mm compressed estimate)Displacement of 1 cyl. .6 liter
Do those sound right? If they are the number I came up with was 2.244 how do I convert this into a compression ratio that I am familiar with.