ka24e

[Oatmealman]

hi,i was thinkin about puttin in a ka24e in place of a ka24de and i was wonderin if it's a direct bolt in or fabrication has to be done,and does any one make turbos for this engine.

[BoyWonder]

It's more of a "do they make a turbo manifold" for it.. and I believe they do, as there are a few ET cars floating around the Turbo KA forum. It would bolt if, from my understanding, but all the wiring is different so it's not going to be worth it.

[Oatmealman]

what about the ka24det is that worth an engine swap,and if it is is it direct bolt in,and do they make ''turbo manifolds for these engines.

[Oatmealman]

bump

[[Zero-S]]

ok you have an 89=ka24e. If you plan on going de you will need to rewire.

Turbo manifolds have been made for both engines, you just have to look.

Both engines will respond nicely to turbocharging with good tuning.

[Oatmealman]

zero know any places were i might find the ka24det and turbo parts for it.

[Oatmealman]

bump

[Soy]

zero know any places were i might find the ka24det and turbo parts for it.

Just as an FYI, before the flame war ensues...

There isn't a ka24det engine, there never was one. That's just what people call a ka24de that's been turboed with aftermarket parts.

And yes, there are plenty of turbo parts to be had for both engines, you just have to get out there and look for them.

Not trying to flame or put you down or anything, just trying to be informative.

James

[The Mic]

zero know any places were i might find the ka24det and turbo parts for it.

there are no ka24de that come stock with turbo. U usually just buy a turbo kit for your existing ka whether it be DE or E. aftermarket parts are all over the place. i dont any sites off the top of my head.

[mrflip69]

BUMP

Hey guy, there's a KA section in this forum that can answer all of your questions. XS Engineering, NSport, Greddy, RealNissan sell decent kits... If you're serious about this project, do some research, you may find that making your own kit might be cheaper and have better results.

[240SXT]

Check this new site...http://www.nizzx.comGot an email from them and looks like they have manifolds for all three and are actually good looking.