I have replaced everything on the cooling system and and its still overheating
I took out the thermostat and it is still over heating
The bottom radiator hose gets hard as a rock and really really really hot
I need help
ka24e over heating again
-
Bradley Ferguson
- Posts: 7
- Joined: Sat Oct 05, 2013 11:22 am
- Car: 1990 Nissan d21
-
jonny 1988
- Posts: 17
- Joined: Sun Dec 29, 2013 7:49 am
- Car: Nissan D21 King cab '87
Suzuki Sj 413 '86
Renault Clio '08 - Location: Isola d'elba - Italy
Re: ka24e over heating again
Maybe you have to change the Head gasket ,sorry
-
Bradley Ferguson
- Posts: 7
- Joined: Sat Oct 05, 2013 11:22 am
- Car: 1990 Nissan d21
Re: ka24e over heating again
But im not getting any mixture in the oil or the coolant
-
jonny 1988
- Posts: 17
- Joined: Sun Dec 29, 2013 7:49 am
- Car: Nissan D21 King cab '87
Suzuki Sj 413 '86
Renault Clio '08 - Location: Isola d'elba - Italy
Re: ka24e over heating again
not always is a symptom
sometimes the exhaust gases entering in the cooling circuit by putting it in pressure
sometimes the exhaust gases entering in the cooling circuit by putting it in pressure
-
Rev_D21
- Posts: 5946
- Joined: Sun Jan 12, 2003 9:49 pm
- Car: 1986.5 D21 LB HD 2WD V6 5Speed
1991 D21 Reg 2WD Auto
1995 D21 Reg 2WD 5Spd
1996 D21 Reg 4WD 5Spd
2012 Versa 1.6S 5-Speed - Location: Somwhere in Western NY
- Contact:
Re: ka24e over heating again
Are you bleeding all the air out of the system properly? There is a bleed screw on the intake manifold.
Re: ka24e over heating again
what thermostat did you use? The thermostat needs to be a 170 degrees and have the air valve hole with the jigger. There is also a correct way to install the air valve or jigger needs to be upper side. I tried to insert a photo from manual but haven't figure it out yet.
Chris
Chris