KA24E: Engine Turns Over But Wont Start

[ScrapnSidwayz]

Alright I got my new KA24E installed in my 1989 240SX and the engine turns over but wont start. I checked the spark plugs and they are firing and when I pull them out they are wet and smell like fuel so I know its getting gas. So i have researched and read that maybe i need to reset the distributor timing because maybe its firing on the wrong stroke but how do i reset it?Also if somebody thinks it may be another problem please let me know.

Thanks,Mike

[Infinitiguy19]

Try searching the FSM: http://Nicoclub.com/FSM. Sounds like its flooded so just hold the accelerator to the floor while starting till it starts.

[ScrapnSidwayz]

I have tried holding the accelerator down but it still wont. So is it possible that the distributor timing could be off?

[ScrapnSidwayz]

I tried looking through the fsm and i found it talking about advancing and retarding the distributor timing but i cant find anything about what im asking.

[ScrapnSidwayz]

Does anybody have any idea?Is it even possible to set the distributor timing wrong?Im not sure cuz the distributor only goes on one way so i dont know how it could be firing on the wrong stroke but i read it could.