KA24E and KA24DE valve covers I powdercoated.

Post by **The_Chosen_One** » Tue Mar 11, 2008 10:59 am

So I got done doing Eomunds valve cover, he went with a Super Mirror Black. I like Super Mirror Black but I hate how it SHOWS every imperfection, just like it would on a normal painted car. Sadly powdercoated isnt invincible to Orange Peel. Anyways Eomund is pleased and Im happy as well. Heres some pics

Post by **sr'saregay** » Tue Mar 11, 2008 11:30 am

wow those look awful.............

haha j/p

Post by **The_Chosen_One** » Tue Mar 11, 2008 11:43 am

sr’saregay wrote:wow those look awful.............

haha j/p

Post by **redhb240SXS13** » Tue Mar 11, 2008 1:37 pm

Wow, thats alot of Pepsi cans. LOL those look good. Wanna do one for me?

Post by **The_Chosen_One** » Tue Mar 11, 2008 2:00 pm

Yea whenever you want, just let me know. What motor for?

Post by **sr20deTsomeday118** » Tue Mar 11, 2008 7:08 pm

what did u use to clean the valve covers before paint?

Post by **The_Chosen_One** » Wed Mar 12, 2008 3:04 am

I used Aircraft remover to strip the paint. My sandblaster was causing problems. After that I ran it through a wire wheel brush.

After that I sprayed some Acetone to clean it. It cant be a Petroleum a base or else it causes problems.

Post by **redhb240SXS13** » Wed Mar 12, 2008 7:22 am

KA24DE. How much you charging to powdercoat?

Post by **The_Chosen_One** » Wed Mar 12, 2008 8:17 am

I charge $65 shipped for 4 cylinder Valve Covers. Is your motor S13 or S14 KA? I have a S13 cover in stock.

Post by **redhb240SXS13** » Thu Mar 13, 2008 6:47 am

S13 KA. I wouldn't need it anytime soon, as I have to rebuild my motor first. You got an e-mail I can reach you at for when I could order one from you?

Post by **The_Chosen_One** » Thu Mar 13, 2008 8:19 am

redhb240SXS13 wrote:S13 KA. I wouldn't need it anytime soon, as I have to rebuild my motor first. You got an e-mail I can reach you at for when I could order one from you?

yea you can reach me at [email protected]

Post by **Neejay** » Thu Mar 13, 2008 8:55 am

Hotness. Looks like I might be getting in touch with you when/if I decide to get mine powdercoated

What other colors are available?

Post by **The_Chosen_One** » Thu Mar 13, 2008 11:13 am

Pretty much whatever color you want.

I have a account with http://www.nicindustries.com so I have a selection of 6500 powders to pick from.

Just make note if its a special color I have to charge $10 to order the color you want if I dont carry it.

Post by **The_Chosen_One** » Thu Mar 13, 2008 11:26 am

Heres some other covers I've done.

http://s266.photobucket.com/al...ating/

Post by **knightricer** » Fri May 22, 2009 8:21 am

hey i know these post are a bit old but i was wondering if you have a valve cover for a 97 ka. color doesnt matter. If so please let me know im looking for one asap thanx

Post by **Rex** » Fri May 22, 2009 8:26 am

Here's his Fabricators Market thread on valve covers.

But if you just need a normal/stock one, there's a Want To Buy section in the Classifieds.

KA24E and KA24DE valve covers I powdercoated.

KA24E and KA24DE valve covers I powdercoated.

Re: KA24E and KA24DE valve covers I powdercoated. (The_Chosen_One)

Re: KA24E and KA24DE valve covers I powdercoated. (sr'saregay)

Re: KA24E and KA24DE valve covers I powdercoated. (The_Chosen_One)

Re: (The_Chosen_One)

Re: (The_Chosen_One)

Re: (The_Chosen_One)

Re: (redhb240SXS13)

Re: KA24E and KA24DE valve covers I powdercoated. (The_Chosen_One)

Re: (The_Chosen_One)

Re: (knightricer)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums