KA24E Alternator

[Woods Crasher]

Well the Alternator on my CA is about to let go. I have 2 brand new KA24E alternators in my garage. I've searched and searched and I found this thread

zerothread?id=166678

ive replaced my ca with a Ka24e , but it requires a little grinding and light fabrication to get the tensioner to work.

the KA and Cadet alt have similar outputs the cade has a lower output, i would try the KA

'

Does anyone know the extent of the fabrication required to get the alternator mounted?

I would rather get this KA alternator in since I don't want any downtime from getting the alternator rebuilt. Thanks guys.

Modified by Woods Crasher at 4:46 PM 7/28/2007
Modified by Woods Crasher at 4:46 PM 7/28/2007

[capowered240]

You just have to modify the bracket alittle bit, but ya it should fit.

[Woods Crasher]

You just have to modify the bracket alittle bit, but ya it should fit.

OK. I'll have to take a look at it tomorrow and see first hand what needs to be done. Thank you for your reply

[Woods Crasher]

OK.... All you need to do to get a KA24E alternator on your ca18dets is grind off top hole, on the KA24E alternator, where the tensioner bolt goes so it's as thin as the CA alternator. Then you need to lengthen the bracket. tada that's it

Modified by Woods Crasher at 7:17 PM 8/4/2007

Modified by Woods Crasher at 7:19 PM 8/4/2007
Modified by Woods Crasher at 7:19 PM 8/4/2007