ka24det turbo help

[dwason240sx]

i have 1996 240sx that im about to turbo t3/t4.looking to get about 280-320 with stock internals.need help with my setup i dont know if i should get 550cc injector or bigger. but dont know what to do when tuninig it.i was hoping if theres any emanage system that could work for this.thanks and also can any somebody post pics of there turbo installation

[Tyler]

550 should be enough for stock internals with a good tune. and you can use emanage if you want, there is lots of tuning software tho, search around here. and maybe if you dont know how to install your turbo kit you should wait awhile and do some research to be sure your ready before you spend all that money, cause it would be an expensive mistake.

[Turbo Nismo]

i have 1996 240sx that im about to turbo t3/t4.looking to get about 280-320 with stock internals.need help with my setup i dont know if i should get 550cc injector or bigger. but dont know what to do when tuninig it.i was hoping if theres any emanage system that could work for this.thanks and also can any somebody post pics of there turbo installation

I personally recomend you to first work with the internals, so you can be more safe and dont experience what I had when I made my car turbo at first with stock internals, it didn't last long. But its your desicion, I'm just giving you an advice. Because if you want, you can purchase the forged pistons and rods combos on ebay in a good price. Look at this one http://cgi.ebay.com/ebaymotors...ories

But if not and you want a emanage system I will go with microtek. Good luck with your proyect