(ka24de) turbocharged

[sxcoupe]

can stock (ka24de) have turbocharger installed if so what size & or type is recomended. list of other mods that will be required to complete install thanks.

[kietdude]

oh man you are just asking to get flamed. check the ka-t forum.

[AeonTorpor]

I don't think he was asking to be flamed, that's a simple question if it can be done. Yes it can, many people have done it. And the second part of what turbo to be installed is a matter of a couple of things:

1. What are you looking for numberwise. (PSI, TQ, HP)2. How much money you have.

But, like kietdude suggested, the KA-T Forums will be able to answer any questions related to your objectives. That and searching will help you out big time.

[Chezedik]

Uhm, he is in a forum dedicated to the turbo'ing of the KA, so yes, flammage. But as the others have been nice, so will I. Typically, the T3/T04e .50 is the turbo of choice. As far as other mods, the sky is the limit. Do a little searching, and stick around if you are still interested.When I came here, I was going to install a blower, and knew nothing about turbos. 2 mos from now, I will be turbo'd. There is a lot to learn here, so stick around.

[WDRacing]

This was probably moved from the KA section. So not knowing that would probably make get my flamethrower out to.

But since I am ALL knowing...lol. Yeah man, the KA can be turbocharged. The most commonly used turbo is a T3/TO4E. Check out IAP, they are our current turbo sponsor and build a great complete kit. There's a link at the top of the forum.

Welcome to the KAT forum. Run by the 2 best looking moderators on the entire internet.

[Craving4Boost]

can stock (ka24de) have turbocharger installed if so what size & or type is recomended. list of other mods that will be required to complete install thanks.

if it can't then i dont see another reason for living anymore!!

[Chezedik]

Welcome to the KAT forum. Run by the 2 best looking moderators on the entire internet.

ROTFLMAO!

[Florida240sx]

Nope.You can only put leaf blowers on them.Turbo is too small. I'll have soem vids up tonight of my KA at 10psi.Gauge says 8 but I know it's a 10psi spring. Probably a leak at the T.

[Chezedik]

It could also depend on where you source from for the WG.

[Iamjohnhayes]

where do you read the boost for the gauge from because there is a slight drop in pressure after the intercooler.