KA24DE Stroker Kit?

[Infidel]

I have a 95 240sx and I was wondering if anybody knows of or has heard of a stroker kit for the KA24DE? If so which company sells one? I appreciate any answers.

- Infidel

[Ni2s4s0aSnX]

No, don't do it. You are the second person who i've had to answer this question for today. Stroking the KA is a wate of time, money, and more money. Stroking the KA is just pointless. You can swap in an RB for less than half of what it will cost you to stroke the KA. A stroker kit for the KA, I've seen them going for around $9,000-$10,000. But, whatever floats your boat, here's a site that has a stroker kit for the KA. Never mind, I can't think of the name of the site.Also check some of the NICO sponsors if you wish.

[Infidel]

$10,000 for stroker kit? Fucc that, i rather just go 4 a swap. Thanks for your info.

[Red coupe]

I don't think it would be 10k...SR stroker kits for 2.2L are only 3k.KA might be more expensive since there is less demand but I wouldn't think a full 10...I don't think Ive ever even seen one though gerneral though it the KA already has a pretty long stroke, and is pretty big for a 4 liter engine, especially one with out any kind of balance shafts...

[Ni2s4s0aSnX]

Ok, not ten grand, but i've seen them for as high as 8 thopusand.

[Chezedik]

I agree, the engine is already over-square, and to aggravate it would make for a pud. There are some kits that have overbore pistons of 1.5mm, which would almost be enough to square up the motor.