ka24de removal? (FIRST TIME)

[40.5sst]

i am swapping my ka24de for a fresh one! i was wondering if anybody has any tips on this process i have never pulled an engine before. although im pretty mechanicly inclined just thought extra advice could never hurt !!!!!!!!!

[timmyk]

make you sure you remove the rad and drain all the fluids? and don't yank it out really quick, once you have it lifted make sure all wires are off....wires ripping off could potential be a bummer

[40.5sst]

im not wanting the transmission just the motor so it should be easier to just pull the engine without the transmission right?

[timmyk]

transmission bolts can be a pain to get to sometimes, but if you can get to them easy, then just unbolt it and will save you some time

[95jordan240]

are you removing the transmission also??

[AZ89two4Tsx]

Get some help from someone that's pulled an engine before. You will thank yourself if you do.

[positron1]

S13 KA24DE Engine Removal zerothread?id=299950 Take your time like they say.

[40.5sst]

thanx man i found this before and couldnt find it again ! thanx zer...52216#

[s13gebala]

i usd posis removal thread to remove mine and it went fine.. remove it with the transmission its way easisewr