KA24DE Problem-Wont Spark.

Post by **new_to_drift** » Tue Oct 11, 2005 12:57 pm

hi i just swapped in a KA24DE motor out of a 97' 240sx into my 89 240sx coupe.Everything is hooked up, and for some reason it will not spark,it cranks over just wont spark so it obviously will not start.I think it may be the distributor or a bad ecu.I was wondering how i could check these things to find out what the real problem is so i can get it fixed.Thanks a lot.

Post by **NISTECH** » Tue Oct 11, 2005 6:30 pm

How much did you swap? ecm and harness needs to be done with the engine swap.

Post by **new_to_drift** » Wed Oct 12, 2005 7:50 am

ya i swapped everything, ecu and harness were included in that.Transmission also.Everything, thats why i dont understand why it wont spark.PLEASE HELP!

Post by **NISTECH** » Wed Oct 12, 2005 3:00 pm

Check your distributor connector closely. Make sure you ignition module is plugged in as well.

Post by **new_to_drift** » Thu Oct 13, 2005 7:53 am

Ok so we didnt have all the grounds plugged in, stupid mistake, but it still wont start.I think it may be timing, but i dont see why, i did the timing exactly how i have before, and before i didnt have any problems with it.

Post by **NISTECH** » Thu Oct 13, 2005 4:15 pm

What did you do to the timing exactly? chain work?Distributor r&r?

KA24DE Problem-Wont Spark.

KA24DE Problem-Wont Spark.

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums