KA24DE MAF Help

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
Goldenlocks
Posts: 3
Joined: Fri Jul 18, 2014 1:57 pm
Car: 1990 240sx Hatch

Post

Hey guys,

My ecu is throwing a code for the MAF sensor. I've taken it off and cleaned it several times with no change in rich/rough idle.
Is there a way to test if the MAF is still good? And if its bad does anyone have one I could buy, or where is the best place to find one?

Thanks


Goldenlocks
Posts: 3
Joined: Fri Jul 18, 2014 1:57 pm
Car: 1990 240sx Hatch

Post

Hey I also wanted to mention that my car isn't running in limp mode. It runs great and revs past 2500rpm just way rich. It scored over 1000ppm in hydrocarbons in the emissions testing. Its CO level was fine. Has anyone else had numbers like these? If so what was your problem?


Return to “240sx General Discussion”