ka24de in a 93 hardbody

Forum for the Xterra, Frontier and Hardbody, the smaller workhorses of the Nissan lineup!
90datech
Posts: 8
Joined: Sun Apr 08, 2007 4:15 pm

Post

i have the motor in the truck. i want to know how to wire the motor up. can i use the harness form the ka24e? if so what do you have to change over. i know the ecu plugs right in and i have to change the dizzy. please help me if you know anything....thanks


90datech
Posts: 8
Joined: Sun Apr 08, 2007 4:15 pm

Post

anybody??

User avatar
Big-Bird
Posts: 684
Joined: Thu Aug 03, 2006 4:41 pm
Car: 2000 Xterra on 'Roids & 2004 Quest SL

Post

Sorry I didn't get back to you sooner but this one had me stumped and I wanted to think about my respsonse. While I can't be 100% sure if this a direct plug in or not....this "should" work but there are bound to be some differences. If it was me I would want to review the wiring schematics for both engines(trucks) just to verify what colored wire goes to where. All it takes is one wire in the wrong connection and poof goes a sensor or an ECU. There are a few people that plopped SR20's into the hardbody but they have made no mention of wiring issues.

What year and model did your KA24DE come from?

I wish I could be of more help to you.


90datech
Posts: 8
Joined: Sun Apr 08, 2007 4:15 pm

Post

i have a 93 hardbody with a 93 ka24de going in it. i have the motor in i just need help on how to wire it up


Return to “Nissan Trucks Forum”