Ka24de - I am looking for the internals specs

[Diggity240sx]

I have found few before....but now I try searching and all I come up with is:2389cc89x96mm bore stroke155hp@5600rpm160FtLbs@4400rpmDOHCCompression 8:9:1, 9:2:1 or 9:5:1

I think the exhaust cam is 248 but I cant remember....was the intake side 232...I have read so much I cant remember where I found the answers...any help would be great.

I am getting ready to pull my motor and build for turbo and I wanna use this software to dyno diff. options. when I am all done I will post my findings for the build. Thanks everyone in advance.

[AZhitman]

What other specs do you need?

[Diggity240sx]

As for now I am just having troubles figuring out the exact compression....I have a 93 240. If I need block numbers to help me before I start the tear downn no problem just let me know how to figure this out and I think I should be good.

[Diggity240sx]

Bump

[TheOne]

9.5:1 compression ratio(9.2 & 8.9 were sohc ratios)

compression across cylinders should be 150-179 with no more than 14 between each cylinder.

[Diggity240sx]

Thank you very much....exactly what I wanted.