Ka24de HeadGasket

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
lebgangstah
Posts: 82
Joined: Tue Nov 29, 2011 8:47 pm
Car: 1992 240sx s13

Post

hey everyone quick question , i just got to changeing my spark plugs on my 92 240sx ka24de , and iv noticed that , cylinder 1 , 2 ,3 looked fine nothing on the spark plugs but normal black stuff , when i went and took out cylinder 4 spark plug it was soaked in coolent , not oil ,and white smoke dose come out of my exahust , is there anyway of stopping it or do i have to replace the head gasket , if so what head gasket should i go to and will an ebay one do for now ? , im prob gonna drive it for a bit and sell it and get something better , so if an ebay one is good for now ill pick a whole set up for it. Thanks./


User avatar
TwoFortyCoupe
Posts: 82
Joined: Fri Dec 16, 2011 6:48 pm
Car: 1991 240sx w/S14 KA-T
T3/T4 .63 AR 50 Trim
Audi R8 Ibis White Paint
2007 Acura Tsx
Location: Delray Beach, Fl

Post

easier said than done, have you ever done a head gasket? Mechanics want like 750-1000 if you haven't (I'm going through that process now)

User avatar
lebgangstah
Posts: 82
Joined: Tue Nov 29, 2011 8:47 pm
Car: 1992 240sx s13

Post

my dad is good with cars changed alot of thing on car includeing the head gasket and im now leaerning mechanics at my school grade 11 , im gonna be changing the head gasket ,got a big enough garage and the tools im gonna buy a whole head gasket kit and install it , but the only thing i need to know is if there is a tut showing how to do it he would like me to try and do it my self , and how to reassemble the whole thing back together and set the timeing all right , i am capable of doing it , i did work on cars at school and helped my dad swap an engine before , this 240 was a project car and i found out that cylinder 4 did have coolent in it and i want to fix it make the car run smooth again , thanks :)

compactfean
Posts: 2602
Joined: Thu Dec 03, 2009 10:28 am
Car: 89 240sx s13 sr gt3071r 23psi
B14 sentra ser sr20de-t 7psi
daily
Location: reno nv

Post

http://www.nicoclub.com/FSM/240sx/91-94
Every thing you will need to know for your step by step

User avatar
TwoFortyCoupe
Posts: 82
Joined: Fri Dec 16, 2011 6:48 pm
Car: 1991 240sx w/S14 KA-T
T3/T4 .63 AR 50 Trim
Audi R8 Ibis White Paint
2007 Acura Tsx
Location: Delray Beach, Fl

Post


User avatar
lebgangstah
Posts: 82
Joined: Tue Nov 29, 2011 8:47 pm
Car: 1992 240sx s13

Post

thanks guys :) , also i dont wanna pull my engine out of the engine bay? is that fine , i know it would be easy to do it pulling the engine out but id like to leave it in just change it ? also will this kit be fine , http://www.ebay.ca/itm/91-94-Nissan-240 ... 1c226c614f like i said its not gonna be rebuilt or anything just a quick repair driveing it for the summer and selling it , trying not to put any money into my first car ,

User avatar
TwoFortyCoupe
Posts: 82
Joined: Fri Dec 16, 2011 6:48 pm
Car: 1991 240sx w/S14 KA-T
T3/T4 .63 AR 50 Trim
Audi R8 Ibis White Paint
2007 Acura Tsx
Location: Delray Beach, Fl

Post

Yeah

User avatar
lebgangstah
Posts: 82
Joined: Tue Nov 29, 2011 8:47 pm
Car: 1992 240sx s13

Post

okay im gonna order it and when i get it ill start takeing things apart , thansk for the help guys


Return to “240SX Technical Forum”