ka-t wont start???

[nismo_power]

okay so i just finished my ka-t and it will not start???the car cranks and i checked it for spark and there is spark, my fuel pressure gauge is telling me there is fuel coming???i wired a z32 maf in and got my ecu tuned from emance with a conversion harness for obd1 to obd2...what could be wrong???

z32 maf was wired like jwt's website???

[StockSucks]

you just finished your Ka-t? id you do a full build or just bolt on a turbo kit or what? First thing i would check all of your wiring and electrical connections

[kouki_hmongster]

try to give it some gas and when it starts keep the rev up until it warms up and then it should idle fine......having same problem w-emance......

of course thats after making sure you dont have vac leak....

whats your fuel pressure reading? should be at 36psi, double check everything.


Modified by kouki_hmongster at 12:09 AM 9/17/2008

[nismo_power]

the car does not start at all???all the electrical lights up fine im getting 11.5 volts the car cranks up but it will not fire up???fuel pressure is at 42 psi, i have a nismo fpr not yet adjusted yet...what could it be???

[fiznat]

Just getting a reading on your FPR isn't enough to tell you that the engine is actually getting fuel. Crank it over a few times and pull the plugs, make sure they are wet with fuel. If not, looks like you've got an injector or rail problem. If you do have fuel, I'd look at timing first.

[andrewdees]

I'm having the same problem. I just installed an Emance ECU and made the coversion harness. The car cranks but I am getting no spark. I called Jason @ Emance a few times over the past few weeks and wrote emails but have gotten no response. I made the conversion harness exactly to the specs on his website with the ECU pin numbers. I am getting fuel but no spark.

[andrewdees]

bump bump

Has anyone made the conversion harness for a 1997 240?? Im thinking maybe the pinout on emance's website is for a 1995?? I dunno. I need helppppp.

[240punk]