Ka-T parts for Sale

[Iamjohnhayes]

I allready have them in the classifieds

zerothread?id=158055

I have a KaE Manifold , partial d/p, Garrett T3 wastegate actuator, and Garrett T3 internal Wastegate Assembly BRAND NEW!
Modified by Iamjohnhayes at 3:44 PM 2/10/2006

[LEMHEAD16]

what happened? Are you changing your set-up?

[Iamjohnhayes]

yes i will be attending school in a few weeks and will be about 300 miles away from 90% of my tools and my welder. so i am going with a jgs manifold and d/p to cut down on fabing also i have decided to go to an external w/g set up.

[label]

how much do you want for the downpipe

[Iamjohnhayes]

its only about 2/3rds of a downpipe it just has a 3 bolt flange and an 02 bung. but i'll send it for like 20 bucks shipped. it is set to point straight down with the turbo on the manifold for sale so if you set your turbo flange paralel to the ground it will angle out towards the wheel slightly

[98240]

this is how my turbo is

[fiznat]

woah what a weird looking compressor!

Anyways, 1 day in the KA-T forum as usual. Good luck selling your parts

[98240]

ill take it if it fits that

[Iamjohnhayes]

it is a three bolt flange on the d/p with the "triangle" made by the 3 bolts pointing straight up ( ^ ). if you are capable of fabricating the 2nd half of the d/p you should be able to use it. i would just recomend cutting off the last inch to inch and a half before welding on the pipe you use to connect it to your cat/test pipe.

[98240]

like this onehttp://forums.nicoclub.com/zerothread?id=156067

[Iamjohnhayes]

exactly. i also have the flange for the turbo that adapts the garret 5 bolt pattern to the 3 bolt pattern

[mirra32]

responded to you 1st email....waiting for second response....phone number and if you take pay pal
Modified by mirra32 at 7:21 AM 2/10/2006

[mirra32]

if this will fit a z31 t3 7 bolt(i know its five bolt)but if it ll fit ok....i'll take it...with wastgate....so dibs till i find out it works....i sent you an email from [email protected] me ur phone number through there

[Iamjohnhayes]

woah what a weird looking compressor!

Anyways, 1 day in the KA-T forum as usual. Good luck selling your parts

the only thing i see weird it that step on the intake of the compressor houseing right before the compressor wheel. other than that it looks similar to my super 60 w/o the inlet on it.

[fiznat]

start thinking about replying in the B/S/T thread... this thread has about 3 hours left...

[Iamjohnhayes]

thanks for the heads up and letting it float around here, Fiz