KA-T help in ATL, GA..............

[JayPat83]

I am getting ready o prefom a custom KA-T setup on my 95 240. i will be rebuilding the motor and putting in low comp pistons and a nice set of rods. going to get a cometic head gasket and ARP studs for everything. we will be running a turbonetics T3/T4 externally wastgated on a cutom manifold built for high boost. thinking about running 550cc or 50 lbs injectors with a topfeed rail. V-mount upfront and full 3" exhaust out back. if i have any problems with this setup not working who in the ATL area can come to my rescue?????????????????

[:: orion ::]

Go bigger with injectors if you're getting a built motor.

Stock block can take most the HP 50lb'ers can provide (just at 350rwhp)...so if you're building a block, get the 72lb'ers, or 740cc if you wanna spend the $$$.

- Brian

[JayPat83]

i dont want to get into engine management stuff cause i will be selling the car to get a new Z around the beginning of the new year so i will probably be sticking with some 550's or something and no more than 350 whp.

[turtl631]

so...you want to turbo your s14 for 1 month? *Doesn't get it*

[Structure240sx]

seriously, dont put that money into your car if you're going to sell it. you will jsut lose money on the deal

[JayPat83]

nah it is almost paid for so i want to make it a valuable car cause right now i would have to pay someone to take it off my hands. were gonna do the built ka-t and do a v-mount, widebody it and do the 300zx brake upgrade i've been storing up. also gonna put a vented cf hood and cf trunk lid on. a 6 point cage and all drift suspesion made by core products will be installed within a month. who knows i might keep it along with getting another Z.

[driftjunke]

If you need any help in the ATl area, just give us a call, Core Performance in Conyers is doiong your suspension peices?

J.D.

[JayPat83]

yeah mike is working on all core products drift parts for the s14 now on my car. but J.D., i will deffinity halla if i get into any jam with the project.