KA swap.... Need help plzzzz

[sleepyeyes]

Okay i really need to get this swap done by the end of this week, let me tell you what ive done...Ok, i have a 91 body, was automatic but ive done a manual swap, i have a 95 ka, 95 transmission and 95 drive shaft.What drive shaft do I use? The 95 transmission didnt fit, the bolt that hold up the rubber in the middle were way off. So do i use a 91 driveshaft, or do i have to go all 91-94 parts and the only thing i use 95 is the ka? Someone plz help, I need the car to be running cause im movin out on the 1st. Thnx

[Structure240sx]

the transmission should bolt up fine. are u using the 5spd transmission support/crossmember/mount? and u will need an s13 89-94 5spd driveshaft, 95-98's wheelbases are like 3" or so longer. to get the engine started make sure ur using the dristributor, wiring harness, ecu from either the 95 or the 91