Just trying to locate some info.

[southernsteel]

Well, first off, I've found a plethora of info on the b13. Hats off for that.

But I need info on the b14. I've seen threads about 200sx's and g20's. Compared to my sentra, they look to be pretty similar with size and frame. So there's one thing I'm not sure on. If someone could elaborate on the differences or direct to me somewhere that explains the differences between the three, that'd be great.

I do have a swap question as well. I've looked at the FAQ and seen the thread for the ga to sr swap. Is the guide universal? I'm assuming it is, as it doesn't say anything specific, but I just want to be sure before I head up to the junkyard and start pulling parts. And once I do begin, are there any problematic areas I should look for?

Thanks for all the help.
Modified by southernsteel at 7:26 PM 4/8/2009

[ABNRML4U]

Take your Time , [Edited by mod - Please refrain from referring members to other Nissan forums]

[southernsteel]

I have not tried there. I'll take a look around and see what I can find

[nametakennow]

The US 200SX is a 2-door B14 Sentra. Everything that applies to it applies to your Sentra as well.

The G20 shares its engine and transmission with the SE-R model, but is on a different chassis.

The GA->SR swap for a B14 is essentially the same, just substitute 95-99 Sentra/200SX SE-R parts for 91-94 SE-R parts.

No need to go digging elsewhere, we've got you covered.

[ABNRML4U]

Do Homework too...

[southernsteel]

The US 200SX is a 2-door B14 Sentra. Everything that applies to it applies to your Sentra as well.

The G20 shares its engine and transmission with the SE-R model, but is on a different chassis.

The GA->SR swap for a B14 is essentially the same, just substitute 95-99 Sentra/200SX SE-R parts for 91-94 SE-R parts.

No need to go digging elsewhere, we've got you covered.

Awesome. That covered absolutely everything I was wanting to know. Thanks a ton.

[ABNRML4U]

NICOCLUB #1