Just Put in a v1 Short Shifter in my s13

[newton240sx]

This isnt a write up just some pictures from when I did it yesterday. I used someones write up on it and it was pretty helpful. It aint bad for 25 dollars haha. Now if my car would just run right . But again not really directions or steps.and I didnt take a picture of every step. just some pictures.



thats my regular shifter before I started



Theres the v1 kit I bought



just the knob off



shift boot off



upper dust boot off and the metal retainer ( mine is warped as hell and after i finished i only could get 3 screws in the thing )



shifter out ( forgot to take some pictures for that )



This is the washer that came out and when it came out it was warped also and i had to straighted it out .



this is it with the first part of the new shifter in and with that gay platform with the four screws which were hell to put on. ( around this time my friends came over so I again kept forgetting to take pictures )



top of new shifter in and the bottom dust boot



picture from side with the top boot on ( this was seriously an hour after the last picture, those four screw on the retainer plate were awful to me )



shift boot on and uncracked dash lol



Finished product. It shifts great but my car is running like s*** right now so I dont even get to go have some fun with it.I forgot to say about the retainer clips and taking some other little things out . But I think overall its a good product and I had full intentions of doing a solid write up but my friends and coors light wouldnt let me. But this is just some pictures and my experience with the whole thing. please dont flame me. hope you enjoy it.

[krash]

Sweet man. I just put the Isis in my car not too long ago. Wondering how to get the actual shifter to be shorter.... The throw is nice though

[newton240sx]

haha thankyou. yea the throw is significantly better but i didnt see the 1 inch drop that they claimed i would get on the shifter height

[badbob2121]

where did you buy it from, did some searching but cant find it for 25? lol

[newton240sx]

haha ebay. it was 5 dollars with 20 shipping. this link shows it for 30 something and doesnt say v1 on it but it is a v1. thats pretty much the same kit i got.

http://cgi.ebay.com/ebaymotors/89-94-NI ... 2c50c67852

[Chris28]

That washer is supposed to be wavy like that.

Short throws are nice.

That is all.

[Legion76]

I just put a B&M shifter in my S14 after an engine/transmission rebuild. Huge difference from my old worn out shifter, I could barely tell that the car was in gear and thought I didn't put something back together right. Takes some getting used to, but love it so far.

[S13AL]

I could barely tell that the car was in gear and thought I didn't put something back together right.

My friend and I had a similar situation in his integra. I almost went to crawl back under the car to see what was wrong after moving the shifter and then I realized it just had super short throws.

[newton240sx]

That washer is supposed to be wavy like that.

Short throws are nice.

That is all.

yea it was still wavy but that picture was from after i straightened it out. the thing wasnt wavy it was beat to hell.

[newton240sx]

I just put a B&M shifter in my S14 after an engine/transmission rebuild. Huge difference from my old worn out shifter, I could barely tell that the car was in gear and thought I didn't put something back together right. Takes some getting used to, but love it so far.

haha yea its real short but i love mine

[OutToWinPAHC]

Sweet man. I just put the Isis in my car not too long ago. Wondering how to get the actual shifter to be shorter.... The throw is nice though

Cut it and use a die to thread it.

[newton240sx]

yea ive seen people cut it before