just got the '25 into my buddy's car *PICS*

[Ender_Zero]

we suck at wiring, so we had to drag the car to cartunes motorsports here in dallas to finish up. while it was there, they found out that the gas tank got rusted and fugged up from sitting so long. all were waiting on is the new gas tank and we can drive it around! heres some pics

[Ender_Zero]

more pics

[Ender_Zero]

why cant i make my pics bigger? it says theres a max of 300x300 pixels...thats pretty small...

[Ender_Zero]

one more really small picthis one was about 15 minutes after we tightened the motor mounts up. we used mickinney for the motor and transmission mounts. and the transmission mount sucked. we had to drill it out to make it fit. oh well... i cant wait!

[gabossie]

Looks good. To get the pics bigger, upload them to the NICO photopost and link them from there. http://www.nissaninfiniticlub.net/photopost

[NISMO_RB25]

The RB25DET is nice, you will like it. If you don't have a LSD yet, expect wheel sping through 3rd gear

[gprodigy85]

you guys should come down to the weekly meet in lewisville (off of 35 at the super target) id like to see the rb25... i will have mine in very soon.

[FAST-DATSUN]

ender-zeroCall me so we can get you a new trans mount. I'm not sure what happened to the trans mount, but we will send you one of the GEN-3 mounts that are different and should fit better...

[Ender_Zero]

you guys should come down to the weekly meet in lewisville (off of 35 at the super target) id like to see the rb25... i will have mine in very soon.

HAHA ROFL i live like 100 ft away from the moes where everyone meets every wednesday and i try to show up every week. i used to be the one with the red/black stripes 69 camaro, but i sold it and now have a black s13 coupe with a dent on the driver side front 1/4 panel, call me out if ya see me next wed (who knows i may be in the sil-line next wednesday!)

[Ender_Zero]

ender-zeroCall me so we can get you a new trans mount. I'm not sure what happened to the trans mount, but we will send you one of the GEN-3 mounts that are different and should fit better...

will do! thanks alot! we do need one bad b/c as much as we drilled, we only got 2 of the bolts on opposite sides to go in.much appreciated!

[Ender_Zero]

http://www.nissaninfiniticlub....page=

thanks for the advise gabossie!

[NISMO_RB25]

I actually had the same problem with the transmission mount. I used a small floor jack and just spread it a little, then everthing lined up fine. If you don't want to send it back, it is an easy fix.

[Ender_Zero]

ya, we tried that... no werky

[FAST-DATSUN]

Got one on the desk waiting for your call!!!!!Mack@ McKinney Motorsports

P.S. NISMO do you need one, we can exchange if you need!!!!!

[NISMO_RB25]

Got one on the desk waiting for your call!!!!!Mack@ McKinney Motorsports

P.S. NISMO do you need one, we can exchange if you need!!!!!

I appreciate it, but I am satisfied with mine, it only needed a little adjustment. Thanks for taking care of your customers!! It is why I always recommend you. :ylsuper

[Ender_Zero]

whoops, ive been so tied up with trying to get the RX7 to run i forgot to call. ill definately call tommorow. i appreciate ya!

[Ender_Zero]

oh, and update, the tank is in the shop just waiting to go in.

also, my S13 no longer has a huge dent in the 1/4 panel, now if you go to the moes meet, just look for a black coupe SE, or the silvia in the pics. (tommorow looks like its not going to be in the sil-line though)

[Ender_Zero]

wooo hooo!!! it lives! i have been working on it for 2 days straight and it finally runs!!!!!! i drove it around, and theres a huge boost leak. the rubber pipe on the intercooler has a giant crack in it and when i try and build any boost whatsoever it leaks out. today im going to see if i can get a replacement from cartunes. it finally runs! it idles good, and sounds great!

oh, and many thanks to mckinney motorsports for sending me the new transmission mount. ill be sending the old one today.

[NISMO_RB25]

way to go!!

[gprodigy85]

awesome! i just got my 25 in my car yesterday, should be running soon enough, we'll have to meet up in lewisville when im up and running