just got a new (to me) 96 SE

[rookie92]

after being in the absence of my s13 for over 2 years i finally got a s14

but i want to make it look like the 97-98 front... i'm really not that familiar with the forum search options so figure i could post here

so essentially what (complete list) do i need and where's the best shopping options?

thanks in advance

p.s. sorry moderators this was supposed to go on that post at the way top that reads "no flaming"
Modified by rookie92 at 10:07 PM 9/29/2009

[leesredgt]

welcome NOOBERT!!!

[rookie92]

noobert is correct 9 post and going strong ha ha, so how about that question eh?

[1996N1ss@n240SX]

[blacksrjdm]

after being in the absence of my s13 for over 2 years i finally got a s14

but i want to make it look like the 97-98 front... i'm really not that familiar with the forum search options so figure i could post here

so essentially what (complete list) do i need and where's the best shopping options?

thanks in advance

p.s. sorry moderators this was supposed to go on that post at the way top that reads "no flaming"

Modified by rookie92 at 10:07 PM 9/29/2009

Search, spend some time in peoples build threads, research and research again any parts you might want to buy. Building a car is a process that you are going to go through, and a lengthy and frustrating process. There are vendors all around the outside of the page that you can research parts for, if you have questions about a certain part, call the vendor and get info about it. Post pics of your new ride in order to get some feedback on the car. And take ignorence with a grain of salt. There is alot of it and 1996N1ss@n240SX owns a majority of the ignorence. As far as the front end conversion is concerned search your local junkyards, the classifieds and use the little icon that is flashing "search" for any questions you may have. This forum is well layed out and the sections are labeled well and very useful. Spend time in the body section and look for front end conversions already complete, see what they went through and you will get an idea of what you will be going through. Dont however make 10 threads about "how do I do this?" or "where do I get this?" or "is this ebay part any good" these threads are fails, pretty much, if you would like to get a certain part, wheel, etc... dont be looking for a NICO approval on everything, just build the car to your liking and be happy with it.

[1996N1ss@n240SX]

way to be an ***hole...f***ing f*****...just cuz im getting my car fixed in a shop and u dont have the money for it and u have to do it urself doesnt make me ignorant

[1996N1ss@n240SX]

you dont know why it costs so much...used ka not from craigslist ...with LOW miles and atleast a YEAR warranty...plus extra parts becuase what happened with my last KA was a rod shot out the side knocked a bunch of s*** loose including ac compressor i need practically all new parts for my engine bay including labor plus some performance parts im picking out is about 3000 dollars with EVERYTHING

[1996N1ss@n240SX]

the fail is on you sir because i havent brought my car to a dealership...not once...so u fail...and thats good and all with the scrap yard...there only 2 in naples and none have a ka or even a 240 or 180 or 300....and im getting a certified engine that i know will last me and i wont have to rebuild...and i changed my story because as of 2 days ago i didnt actually know what happened in the engine bay....like i said a rod shot out the side and left hole in my block

[1996N1ss@n240SX]

yes it WAS going to be at a nissan dealership,but i have a shop in town that ive been using for 4 years now on my cars and s***....theres a difference between then and now ...just stop bro i can do this all day and ur gonna get this noobs post locked

[1996N1ss@n240SX]

i have been takeing cars to that shop for 4 years...my parents didnt car if i drove when i couldnt....they are a BODY shop...and dont normally do ENGINES...but since i know them they are willing to do it...THATS WHY I DIDNT THINK OF THEM RIGHT AWAY.....because they are a BODY SHOP!

[1996N1ss@n240SX]

http://acscarstar.com/401.html theres there website...where they do BODY WORK!...u wont find anything that says they do swaps

[blacksrjdm]

Sorry OP you have been thread jacked. Start a new one and add pics.

I have cleaned up my polution. I apologize to the OP for jacking the thread. Still feel the same way about 1996N1ss@n240SX, just that I dont need to leave all of that on there. Good luck op, Still need pics. Zenktistac or whatever. You fail worse, noob.
Modified by blacksrjdm at 7:48 AM 9/30/2009

[zenkistic]

There is alot of it and 1996N1ss@n240SX owns a majority of the ignorence.

not needed.

Guys, stop polluting this thread. Nobody cares any more.

[1996N1ss@n240SX]

atleast im not lying and proving my point FTW

[blacksrjdm]

not needed.

Guys, stop polluting this thread. Nobody cares any more.

O i guess this is the Noob 2 cents thread. U fail too.

[rookie92]

wow! well i have no more use for this thread at all. [email protected]'r just a d bag... and that coming from a NOOB!

blacksrjdm...shame on you for putting up with this d bags answers and polluting the site.

that's my 2 cents...off to post somewhere else

[blacksrjdm]

Peace, still wanna see pics though.

[simmode1]

This thread is a goddamned shame.

Sorry about all this, new guy. Here's everything you'll need for a Kouki conversion:http://www.mynismo.com/products/?ID=4089

But I urge you not to do it. Zenki's are really sexy and they should stay that way. Here's some inspiration:zer...zenki

[DMan II-40]

I just wanted to say that I had the same intentions when i bought my S14. I wanted a S14 Kouki and figured if I got a zenki I would just convert it. Alas I did get a zenki and it has grown on me, I have no intentions of converting now. That and money can be spent on better things.

[Lonismos14]

Man i feel the same exact way

I just wanted to say that I had the same intentions when i bought my S14. I wanted a S14 Kouki and figured if I got a zenki I would just convert it. Alas I did get a zenki and it has grown on me, I have no intentions of converting now. That and money can be spent on better things.

. I was going to convert it,then i decided im gonna be different plus these people on this website sell s*** to damn high. But welcome to nico

[rookie92]

ha ha thanks for the input guys, especially simmode1.

I WAS gonna do the kouki swap and then i came across an sr20 for very very cheap, so now i have that in my garage

for some reason the kouki front just makes me drool, must be those headlights. maybe some zenki projectors will ease the pain? maybe....

posting pics in a bit

[rookie92]

ohh crap, how do i post pics?

[Ramonesfreak2010]

Host the photo on photobucket.com or flickr.com

[rookie92]

damn! i guess hosting them on this server would just be ridiculous since everyone wants to post pics of their car. ooooooohhh well, pics......well pics eventually ha ha

[simmode1]

No prob, Rook!

BTW, Zenki's don't come with projectors. Regretfully, we have to retrofit them.