just got 91 q45 brake calipers,, wondering

[240SX805]

if any one has a link for install looked on form couldnt find pic installs

thanks any one?


Modified by 240SX805 at 3:54 PM 9/18/2008

[ryan15]

Just install how you took your old calipers off, really all you need to know is the bleeding part, which im sure you know how to do.

Ryan+

[Pento240sx]

Here is a link on how to do it. Have Fun. http://www.ka24development.com/brake_upgrades.html

[D-UNIT]

yup plug and play or er.. r & r - remove and replace. oh wait you need to cut the backing plate. The hardest part IMO.

[hbpignosePA]

u dont have to cut the backplate... well the whole thing, just the piece that overlaps the cailper...

i bent mine back and it fits perfectly, no rubbing w the rotor and will stop alot of the dust



theres a picture i have after the swap

[240SX805]

thanks for the info,,,,will do swap once roters,stainless steal brake lines and pads come in,, ill put pics of install after i do install

Modified by 240SX805 at 10:13 AM 9/18/2008
Modified by 240SX805 at 10:14 AM 9/18/2008

[ILoveMyRHS13]

u dont have to cut the backplate... well the whole thing, just the piece that overlaps the cailper...

i bent mine back and it fits perfectly, no rubbing w the rotor and will stop alot of the dust

theres a picture i have after the swap

Wow, did you seriously not paint them? That's horrible. Leave it to a 240 owner...

[hbpignosePA]

haha its on my to do list.... i bought a set off here that i thought were good, turns out they needed rebuilt painted those got them on, just a bad experience....

got this set, try 3 to get everything to line up right, (had one bracket that was wrong as well) ment i wanted to mount them before i left for school...

needless to say i will paint them this winter when (and if hopefully) i pick up a daily