Just a simple Daily Driver Build!!!

Discuss the RB20, RB25 and RB26 series engines.
User avatar
Jables
Posts: 437
Joined: Fri Jul 29, 2005 8:11 am
Car: 1995 RB26DET S14, 1991 RB25DET S13, 1992 S13 LS1 Coupe
Location: Birmingham, AL

Post

As if one project isn't enough i decided to take on yet another while rebuilding the RB26 car that can be found here:

finally-new-turbo-setup-and-back-on-the ... 52824.html

I picked this shell up from a buddy of mine and had some extra stuff laying around from a part out i was recently involved in.

Image
Image


Also installed stainless steel clutch line, brake booster delete kit, and all new stainless steel brake lines from Chasebays

Image

Image

Image

Image

Gave a call to my good friend Kevin @ Enjuku and got some isis goodies on the way

Image

Image

As it sits now. Nothing special. Just going for a mostly stock car with just a few upgrades. Something that will just be fun to drive around everyday..

Image

Just waiting for a few more things to show up via UPS and everything should be on the road shortly! Will update as soon as i can!!!
Last edited by Jables on Wed Oct 13, 2010 9:04 pm, edited 1 time in total.


l0nestar
Posts: 2251
Joined: Fri Mar 10, 2006 5:24 am
Car: 1993 Nissan 250SX
2004 Toyota Altezza
1963 Chevy Impala SS
Contact:

Post

Approved!

I like the idea of replacing the factory hard lines. Where is that plate for the MC from?
I wish I would have seen one of those radiators before I purchased mine.

User avatar
Jables
Posts: 437
Joined: Fri Jul 29, 2005 8:11 am
Car: 1995 RB26DET S14, 1991 RB25DET S13, 1992 S13 LS1 Coupe
Location: Birmingham, AL

Post

l0nestar wrote:Where is that plate for the MC from?
I wish I would have seen one of those radiators before I purchased mine.
Thats the brake booster delete kit that Chasebays makes!! The whole kit is really nice! New hardware and allows you to use an aftermarket wilwood master.. Not bad for the price either!!!

The radiator is designed and built by All In One Fab. Super nice guys over there as well!!!

robbie2883
Posts: 605
Joined: Thu Jun 01, 2006 5:36 am
Car: 1998 RB25 Kouki

Post

i like those lines alot. mind if i ask how much the brake lines ran?

User avatar
Carl H
Posts: 5985
Joined: Mon Aug 04, 2003 4:09 am
Car: 1995 Nissan 240SX SE RB30DET

Post

any proper hydrualic shop can make lines just like that...fwiw.
i personally hate them because they have very little give and tend to kink if bent beyond limit which means its new line time.

User avatar
Jables
Posts: 437
Joined: Fri Jul 29, 2005 8:11 am
Car: 1995 RB26DET S14, 1991 RB25DET S13, 1992 S13 LS1 Coupe
Location: Birmingham, AL

Post

robbie2883 wrote:i like those lines alot. mind if i ask how much the brake lines ran?
sorry for delayed response. IIRC the entire line kit was $299. BMD kit was right around the same ball park give or take.

User avatar
Jables
Posts: 437
Joined: Fri Jul 29, 2005 8:11 am
Car: 1995 RB26DET S14, 1991 RB25DET S13, 1992 S13 LS1 Coupe
Location: Birmingham, AL

Post

Small update:

Finally got some free time to put some other new goodies on. Again thanks to Kevin @ Enjuku and this is how it sits now. Found some cheap wheels and rubber and enjoying it as a daily. The ride is great and now i just have to put aside some time and money to do an alignment.

Image

Image

Image

Image


Return to “RB20DET / RB25DET / RB26DETT Forum”