JDM transmission rebuild kit???

[spolitte]

Does anyone knowanything about RB20det transmission rebuild kits such as, does nissan Japan still make them? Who would I have to contact to get one (friend will deal with shipping etc.)? Parts #, cost?

I've read all the threads about rebuilding the transmission with the KA's, buying another RB20 transmission from an importer (most likely will be hit or miss), and some other ideas/options, but I was just trying to figure out the viability of just buying a JDM rebuild kit thru a frind in Japan, and having them ship it to me, and if rebuild kits even exists anymore for these transmissions.

If anyone has any info, please let me know

[krayton]

cant ka trannys just go right on no issues? or is that just with the rb25s

[spolitte]

From what I understand the KA internals can go into the RB20 bellhousing no problem; however, it causes two side effects that are often undesireable. First, it sets the actual shifter back inside the S14 (and I think it is great where it is right now), and second, unless you get a custom cut driveshaft then it puts unwanted pressure on both the transmission as well as the rear end.

[krayton]

i think your a little loss on that second thought.

and the shifter movement is tiny. i think you wont notice it.

[turboredneck]

I just put in a ka transmission in my s-13. I had to have the driveshaft shortened 2 1/2" and make the hole in the floor board bigger(it wont let it go into 4th or reverse).Plus I think there are 2 bolt holes that dont line up in the bell houseing.

[jaykeMURD]

Not sure if this will help ya, but I'm pretty sure Z32 internals are interchangeable with the RB25 trans...

[DJDANGER24]

any links to this ?