JDM Tanabe DF210 and Sway Bars

Forum for Infiniti M37, M56 M35h Hybrid and Q70 owners.
Calb0
Posts: 20
Joined: Sun Mar 19, 2017 8:52 am
Car: 2012 Infiniti M37s

Post

Hey guys,


New M37 owner here and was curious to see if anyone has bought and installed these JDM Tanabe DF210 Springs on their M37s RWD. I know our chassis are similar to the Japanese ones, called Tanabe USA and they couldn't verify. I wanted springs with more of a drop without going to coilovers, Not too selection when it comes to Mods on the M. Asked Tanabe USA about Rear Sway bar as well and had no clue. Anyone have any of these suspension mods / chassis braces?


Thanks in Advance


ssmrico
Posts: 402
Joined: Mon Mar 13, 2017 6:10 am
Car: 2011 Infiniti M37 S

Post

bump for info

User avatar
Debonair
Posts: 1109
Joined: Tue Sep 09, 2014 12:58 pm
Car: 2011 Infiniti M56
Location: 408 NOR CAL

Post

Calb0 wrote:Hey guys,


New M37 owner here and was curious to see if anyone has bought and installed these JDM Tanabe DF210 Springs on their M37s RWD. I know our chassis are similar to the Japanese ones, called Tanabe USA and they couldn't verify. I wanted springs with more of a drop without going to coilovers, Not too selection when it comes to Mods on the M. Asked Tanabe USA about Rear Sway bar as well and had no clue. Anyone have any of these suspension mods / chassis braces?

Thanks in Advance
Not a similar chassis to the Japanese Y51, the same chassis. I have not seen anyone running DF210's. After the cost of shipping springs from Japan and buying aftermarket struts (I would, OEM will probably blow when dropped that low) they are probably too close or more expensive than getting some adjustable coilovers that are already stateside.

mutant 9
Posts: 40
Joined: Wed Aug 17, 2011 6:10 pm
Car: 2009 FX50, 2011 M56s, 2013 M37xS

Post

any idea on the sway bar? that would be a nice addition...


Return to “Infiniti M37, M56, M35h Hybrid and Q70 Forum”