Jacksonvile machine shops?
-
S14owner96
- Posts: 17
- Joined: Wed Mar 31, 2004 5:18 am
- Car: Keeping my car looking stock
Jacksonvile machine shops?
Anyone in the Jacksonville FL area have any good ideas for a machine shop? I am going to take my flywheel there to get it resurfaced. I don't just want to take my chances really, I figured if maybe someone knew of a good shop. I haven't even found any good tuner shops, they all suck, so if you could give some info on that too. TIA
-
HeavyDuty
- Posts: 1281
- Joined: Tue Sep 23, 2003 4:51 pm
- Car: 1995 Infiniti Q45
95 Nissan 240SX S14
96 Nissan D21
06 Nissan 350Z Z33
Thanks Greg!
How funny that since the Q forum is a little sleepy this morning, I decided to peruse the S14 area.
In Orlando, I use Dover Cylinder Head. Their original shop is in Jax, I don't remember exactly where, but probably on the Westside.
They look/act/sound country as all he11, but if you're uncomfortable with the guys in Jax, they run a truck to Orlando regularly & Jim can do it here. 407-481-0088.
He's done the machine work on my 3.5 Acura CL/TL-S stroker motors, and just recently resurfaced my 91 SE-R flywheel & enlarged the flywheel bolt holes for installation on my GTI-R motor.
Jason
How funny that since the Q forum is a little sleepy this morning, I decided to peruse the S14 area.
In Orlando, I use Dover Cylinder Head. Their original shop is in Jax, I don't remember exactly where, but probably on the Westside.
They look/act/sound country as all he11, but if you're uncomfortable with the guys in Jax, they run a truck to Orlando regularly & Jim can do it here. 407-481-0088.
He's done the machine work on my 3.5 Acura CL/TL-S stroker motors, and just recently resurfaced my 91 SE-R flywheel & enlarged the flywheel bolt holes for installation on my GTI-R motor.
Jason
can be done over a lunch break if your a lucky guy with a 2 hr. break.....