J30 VLSD: Do I need different length propeller shaft?

[elpiar]

Do I need different length propeller shaft (output shaft from transmission to diff) to put the J30 VLSD (1994) in S13?

[elpiar]

anyone?

[nissanpunkrock]

search

j30 lsd has the abs sensor so its a bit longer but the extra length can be absorbed by the slack thats in the drive drive train. typically.

[rhtuners]

so was that a yes or no cause i am doing the same diff swap and all i found was that 90-94 J30 LSD >> 89-94 240sx you need LSD,AXLES,BOLTS, BUSHINGS, SWITCH DIFF COVER. so do you need the drive shaft also

[Rucca]

no, the s13 drive shaft is fine.

[remotecow]

the drive shaft should b fine...

[leo leal]

while the stock shaft will work, it will cause undo pressure on the bearings and seals. the ABS diff is 3/4 inch longer than non-abs. Get a one-piece drive shaft that is 3/4 shorter than stock.