Ive.........................

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
WONit
Posts: 322
Joined: Wed Dec 08, 2004 8:40 pm
Car: 89' 240sx Redtop

Post

well i just ordered my s13 redtop package from heavythrottle,now i just have to find a cheap exhaust to hold me over until i save enough money to buy a good exhaust system ive alredy bought a 3" test pipe so i just gotta get it from there on back.

Does any one know any one that has a used system for sale????



User avatar
SR20DETPoweredS14
Posts: 94
Joined: Fri Dec 03, 2004 11:24 am
Car: 1999.5 Audi A4 1.8T

Post

I used the stock exhaust...Yes I used the stock exhaust mainly becuase the swap ran me about $8000 and I dident want to wait any longer to do it

WONit
Posts: 322
Joined: Wed Dec 08, 2004 8:40 pm
Car: 89' 240sx Redtop

Post

how did you do that ? isnt the stock exhaust smaller than 3"?

User avatar
justmerging
Posts: 690
Joined: Thu Mar 25, 2004 7:26 pm
Car: 07 Versa SL w/CVT Cuz I'm lazy
Contact:

Post

BRM makes good exhausts for our cars and they are reasonably priced(I beleive right around $350 or so) if you are that strapped for cash just use the stocker. Make sure you tighten the bolts all the way though or your exhaust will leak like a SOB.

WONit
Posts: 322
Joined: Wed Dec 08, 2004 8:40 pm
Car: 89' 240sx Redtop

Post

so the stock ehaust is 3" ?!?

User avatar
AmoebAssassin
Posts: 2424
Joined: Wed Nov 17, 2004 7:11 am
Car: 1991 Base fastback 5spd, black

Post

no, but the flanges are the same shape and have the same bolt pattern,

User avatar
9240sx
Posts: 2676
Joined: Wed Dec 10, 2003 4:06 am
Car: What i believe to be the cleanest s13 in the world.

SR20DET + RS*R-Apexi-Nismo-Trust-HKS= 100% pure love
Location: New Mexico

Post

A friend of mine was low on money,So he got a 3in ebay n1 style muffler for $12 and went to a local muffler shop and had a 3in pipe welded on.was only like $80.

WONit
Posts: 322
Joined: Wed Dec 08, 2004 8:40 pm
Car: 89' 240sx Redtop

Post

ok i got you the flanges line up so ill bolt just has to be bolted tight!!

User avatar
SR20DETPoweredS14
Posts: 94
Joined: Fri Dec 03, 2004 11:24 am
Car: 1999.5 Audi A4 1.8T

Post

Most factory Exhausts are only about 2-2.25 inches, so if your doing the sr swap with a stock exhaust your going to be losing alot of power until its upgraded but other than that its pretty much a direct bolt on.

WONit
Posts: 322
Joined: Wed Dec 08, 2004 8:40 pm
Car: 89' 240sx Redtop

Post

it should be ok for a couple of weeks until i get the $


Return to “SR20DET Forum (rear-drive)”