is this a good downpipe?

[turbo2nr]

some guy selling it, its 3" downpipe/ made for a t4, 4 bolt flange 21" long w/ flex pipe.

i have a to4b will i have clearance issures with a auto s14?

thanks

[MarkEmark]

How would any of us possibly know the answer to that question better than you?

We have no idea what kind of manifold you're running, where the turbo actually sits, how large the turbo actually is (you mention the compressor type, not the turbine), there's no picture of anything...

It looks like a good downpipe, but honestly no one can do anything but speculate. That's the problem with custom set-ups...

[turbo2nr]

yea i guess your right , i should of given more info

i going to be running a to4b on a revhard in a auto s14, i wondering if its going to clear the break lines and also is the t4 flange on the downpipe the same as on a 4bolt to4b? that is my main concern.

thanks

[1995240sxSE]

there is only 1 way to find out, although it looks similiar to mine except for the flex pipe, how much are you biuying it for? I made mine for cheap I will take a pic for u tomarrow. All I did was use a coat hangar straightened it all out then shaped it to how I wanted my downpipe. Then I went to an exhaust shop and they bent it out for me. like 30 bucks including the pipe.

[j-z]

so youre saying its for t4 exhaust? and you have a t3, or t4 exhaust? what mani was that dp made for, that is the question. if you dont know that then you dont know anything about it working or not with your revhard. damn, im so glad i went with the jgs kit. i dont have to worry about jack shlt. well i confess... i do have to weld a bung onto my oil pan. wooptie doo!

[turbo2nr]

in a way i wish i didnt live in nyc people try to rip you off they wany $150 to make a elbow like that in the pic, im getting it for $75. it has 2 o2 bungs welded in it. i just recently spoke to the seller, it was made for a revhard using a t04b turbo, the same turbo i have, so i lucked out.

thanks for all the help guys.

ill let you know how it turn out

[Structure240sx]

it will clear perfectly fine. thats exactly how mine was setup. unless the pipe comes off at a 90" right turn (which it doesnt) it will fit just fine