Is a 1996 Infiniti I30 OBD I or OBD II ?

The club for Nissan Maxima and Infiniti I30 / I35 owners, and the official home of Maxima Club of America!
Ryan Heo
Posts: 315
Joined: Sat Jun 02, 2007 9:40 pm
Car: 1996 Infiniti I30

Post

Hi.I'm looking for a cable for Nissan Data Scan 1.52.I believe my car has OBD II, but this site ( http://202.43.226.57/) told me the car has OBD I. So, I checked my car. There have two connects one is OBD I in the fuse box which is excactly same as a picture displayed by the site. OBD II is outside of fuse box. Which one can I use?Can I use both of them?Inifiniti I30 is same as AUS Maxima A32 (VQ30DE) right?Thanks.


rxm6
Posts: 350
Joined: Fri Mar 23, 2007 12:46 pm
Car: '93 240sx
Location: San Jose

Post

Yes I30 is A32. And you should be able to use both if both are present. 95-96 I believe was the point in time in which OBDII became the preferred and required method of communicating with the car. If you have 96, you most likely have an OBDII ready car.

Ryan Heo
Posts: 315
Joined: Sat Jun 02, 2007 9:40 pm
Car: 1996 Infiniti I30

Post

So... Do I use any type of OBD II cable like this? I have OBD II cable which is used for AUDI A4. I tried to use this cable to my car. It is a light on when I connected on my car, but I think it is not working perfectly. The reason of that a Nissan data scan which is popular software couldn't find ECU on my car. I guess I need to buy another cable.Can I use this one?(http://cgi.ebay.com/ebaymotors/OBD-II-c ... DVW)Thanks.

rxm6
Posts: 350
Joined: Fri Mar 23, 2007 12:46 pm
Car: '93 240sx
Location: San Jose

Post

I suppose. Do you have a laptop OBDII reader or a all-in-one unit. If you have a laptop reader (like I do) there is a unit that goes in between the laptop and the car to translate or something like that. Sometimes it is just a cable, like whats on ebay, and sometimes there is a actual unit. For 9 dollars, you might as well give it a try, if it doesn't work you are not out much.


Return to “Maxima Forum & I30 / I35 Forum”