Interest in Cams?

[Aries]

I'm gauging interest in selling complete set of cams for the different motors, but I need to know how many people are interrested in them for what motor...What motor would you like to see COMPLETE Spring and Camshaft sets for?

[Nismo1182]

CA please

[Cyberkreig]

I voted SR bc i own SR, but on second thought, there really arent any cam choices for the KA guys...

[Aries]

This would expand the choices for all of the motors, and also allow for custom grinds to suit specific needs/cars.

Sets would come complete with camshafts and springs.

[MainEvent212]

i'd be interested in SR cams once i get my SR...

[lilaznvietboi]

KA24DE !!!!!!!!!!

[Dano]

i'd be interested in SR cams once i get my SR...

me too...and then ill be building the KA...so yeah...WHEN i get my sr, may be interested in two sets....hmmm...

-Dan

[BuudWeizErr]

I have an SR, but I think a set for the KA-T should be made. There are already a few different cam choices for the SR crowd.

[Aries]

ok guys, tell me what you're lookin for...more lift, more flow, longer duration...

Just gimme some ideas...I have a meeting with the Comp Cams guys in the morning to discuss this for the bennefit of the Nissan community.

[MainEvent212]

the most HP i can possibly pull out of a stock turbo on a blacktop s14 sr20det

[I am Technoman]

Aries, I think a good set of turbo cams would be cool scince no other company makes turbo KA cams :smoker

[Aries]

sounds good.I'm beating on the cam profiler tonight to see if I can get some worked up that will allow for quicker turbo spool at lower RPMs without a loss of torque.

[DELUCCA21]

KA24DE PLEASE.

[Phax]

I voted the SR20, because I have one. Then all I could think about is why the SR20, there are already all the Japanese aftermarket cams, plus JWT and who knows what else. With turbo cams for the KA24DE, you'd have a higher profit margin. =)

[Aries]

don't look at this as me needing profit...look at this as an opportunity to get something better that another company can't compare to

[Doogz]

CA but i was hoping to do suspension mods next so it might be a bit before i get back to performance.

[krazy skwerel]

ka24e poor sohc gets no love from the aftermarket.

[I am Technoman]

Aries are you going to need stock cams for regrinds?

[Infamous]

KA24DE-TKA24E-T

[Aries]

this wil NOT require stock cams to be used for regrinds.Our goal is to have minimal downtime possible for any car.

[S13Ka24e]

I would like to see some ka24et cams as well, but most of all I would like to someone with the knowhow of what i need, say I have high compression with an ECU someone help me out to figure what the best lift/duration, not just say a mild cam, or "hot" cam or whatnot, just someone to tell for what you want this is what you need.

[Aries]

I would like to see some ka24et cams as well, but most of all I would like to someone with the knowhow of what i need, say I have high compression with an ECU someone help me out to figure what the best lift/duration, not just say a mild cam, or "hot" cam or whatnot, just someone to tell for what you want this is what you need.

how much power are you looking to make?How much boost are you going to run?nitrous involved at all?what other engine mods have you done?

[S13Ka24e]

Actually i'm not going to be boosting, I would just want to see some ka-t cams for those people because most everyone else has someone to go to. As far as my motor, I'm thinking long and hard about Import performance Parts stroker kit (if it will ever come out) and it would be just an All Motor car. So i would have higher compression probably about a 10.5CR and of course I/H/E. It is an auto, but i plan to get a high stall convertor so I would just need a cam to match the stall speed (around 3400-3600). I would have JWT ecu or some sort of engine managmet. I would be happy with 5hp from a cam but would hope for more like 10hp.

BTW on you nitrous ka you ran a 4000 stall convertor right? how streetable was that? Did you dayly drive that?