intakes

[Nebraska240sx]

which intake and filter should I get, I knwo they are basically the same, but which may give me the best hp gain.

[CurlyStooge]

which intake and filter should I get, I knwo they are basically the same, but which may give me the best hp gain.

id go by price, AEM and Injen will both give you equal powergains.

[Nebraska240sx]

how much hp am I looking at?

[CurlyStooge]

how much hp am I looking at?

go to http://www.importtuner.com/tech/0210it_powerpages/ for an article on basic mods for our car.

"After spinning the rollers, the graphs revealed a huge increase of 13 lb-ft of torque at 3500 rpm and a peak increase of 3.4 lb-ft at 4300 rpm. Maximum horsepower was increased by 5.1 and the biggest gain, about 10 hp at the wheels, was realized at 3600 rpm." - Import Tuner

[TrueSlide]

Intake, just grab a cone filter and adapter, the same damn thing without a piece of shiney pipe.

[Dano]

i got an AEM intake for my 95 for $144 shipped from http://www.e3racing.com

-Dan

[I am Technoman]

I like and have the hotshot intake because it is 3 inches thick...

[Dano]

Got my AEM installed today....heres pics for whoever cares.

-Dan

[george]

go with the t3t4 hybrid from turbonetics

[sil80drifter]

and again this kind of thread comes up... i would like to say... ahem... http://www.nissaninfiniticlub....+baby

thank you...thank you very much. (yes I am immodest about my own creativity)

sil80

[95_240sx]

I like and have the hotshot intake because it is 3 inches thick...

Wanna buy my Hotshot Header from me so I can get a turbo manifold?

Email me: [email protected]

Rick

P.S. Anyone got a stock KA Flywheel they wanna sell me?