Post by
cyrus240sx »
https://forums.nicoclub.com/cyrus240sx-u12915.html
Fri Jun 03, 2005 8:40 pm
ok today i installed spl front tension rods on my 95 240sx and heres my review:
GOOD:- Makes caster adjustable- Alot Lighter than old tension rods- Looks alot stronger than old tension rods(larger diameter rods)- Pillowball alot stronger than big rubber bushing- Better road feel in steering wheel- They're Blue!- Easy to install, 15 minutes for both sides, but this was done at a shop with air tools on an alignment rack
BAD:- No give in pillowball, so if you hit a curb or big rock or mountain, you're gonna break something- You pretty much have to get an alignment right after installing them- Adjustability does also mean that they can loosen up and cause a pull, bad alignment, etc.- Better road feel also means every bump causes harsh bangs in front end, not forgiving at all- If you have bump steer because of lowering etc and havent fixed it... this will make it WORSE
Overall I was happy with my purchase , especially the fact that ordering from spl parts is soo easy, since they have my info on file and it takes about 2-3 minutes over the phone to order anything. Even though, my opinion is if your not going to be road racing or doing the weekly canyon runs(me ) in your car, no need for the added harshness of ride quality these rods give you