INSTALL Question: Pivot FLAT FATT.

ONLY for ADVANCED technical discussion about the 240sx!
AustinSilvia
Posts: 577
Joined: Fri Feb 06, 2004 10:06 am
Car: CARS, nissans sr20det ftw!

Post

Hi guys, I know its been awhile but I am looking for info on how to wire up a Pivot Flat-b full auto turbo timer. I found some diagrams for the timer itself, but for the s14 there is no adapter harness to connect to the ignition, so I'm SOL there. I figured I would just splice the three wires I need but instead of using a volt meter I figured I would try to get on here and maybe someone knows which wire is which. on the s14 its a 6 wire plug, 3 of the wires are useless and 3 are needed to splice into the Turbo timer. If anybody has done this before, please let me know... I'm sick of sitting in my car for 2-4 minutes each day before I go somewheres. please let me know, thanksZepp

P.S. for all of you who don't know me, or haven't heard from me for awhile, I finished my sr project >>> 1995 240sx SE <swapped> s14 sr20det VTC and she runs like a dream. PEACE


AustinSilvia
Posts: 577
Joined: Fri Feb 06, 2004 10:06 am
Car: CARS, nissans sr20det ftw!

Post

ok, so after an hour or two with my multimeter I found the correct wires, I will try to post up a diagram, but as far as the wire splicing:

Harness: Timer:black/red yellowwhite/blue bluewhite red

I spliced after the ignition connector, because it was easier to access, and had more wire than the ingition itself. again, this was for the FLAT-B turbo timer, so if anybody has any questions on how to install it, hit me up. its a ***** but its worth it. thanksZepp

User avatar
onosqv
Posts: 5675
Joined: Wed Aug 07, 2002 12:32 pm
Car: '92 240sx Vert
Contact:

Post

Good job finding out the wires.

Next time, for reference for you & everyone else who doesn't already know, try http://www.the12volt.com under Vehicle Info:

http://www.the12volt.com/installbay/det ... rmConstant 12V+ White Ignition Switch Harness Starter Black/Yellow Ignition Switch Harness Ignition White/Blue Ignition Switch Harness Ignition 2 White Ignition Switch Harness Ignition 3 White Accessory White/Blue Ignition Switch Harness Tach Yellow/Red ECM in Passenger's Kick Panel, Position 3 in 120 Pin Connector Neutral Safety Wire Orange/Yellow Brake Switch Red/Green Brake Switch Trunk Pin Red (-) Anti-Theft Module Parking Lights Red/Blue Ignition Switch Harness Head Lamp Red/Yellow L And Red/Blue R at Ignition Switch Harness Hood Pin Yellow/Black (-) Anti-Theft Module Factory Disarm Green/Yellow (-) Anti-Theft Module Door Trigger Red/White (-) Driver's Kick Panel Door Lock Light Green/White (-) Anti-Theft Module Negative Trigger Door Unlock Brown (-) Module above Hood Release Horn Wire Yellow/Green (-) Anti-Theft Module Windows Down LF=Blue, RF=Red/Black


Return to “240SX Technical Forum”