Injen Technology is looking for a 240sx 5spd 96+

Post by **Injentech** » Wed Jul 28, 2004 11:58 am

Hey guys, if you're local to SoCal and have a bone stock 96+ 240sx 5spd, we need your car! We would need it for about a day or so and in exchange for your time, you will receive a brand new Cold Air Intake system from us! I would like to have the car here no later than friday morning, so if you're available let me know!

I can be reached at [email protected] or Pm me with your info. Remember guys, must be bone stock- no mods!

Cheers

Post by **NIGHTfall_240sx** » Wed Jul 28, 2004 11:58 am

:wavey Hi Injen People :wavey

(bump for help)

Post by **Injentech** » Wed Jul 28, 2004 11:58 am

haha- Hi nightfall

Post by **MAXIMUS Nismo** » Wed Jul 28, 2004 11:58 am

come on guys...... injen needs a test mule and they have decided to ask us. If I could, I would buy a 240 and drive from maryland to lend my services!!

And, you get a bew CAI too. Serious bragging rights! :ylsuper

bumpy bump bump.....

Post by **si1via** » Wed Jul 28, 2004 11:58 am

hey Injen, when u guys making a cold air for 1st gen 240? If you make it we will come. Haha!

Post by **si1via** » Wed Jul 28, 2004 11:58 am

wait, why are you asking us anyways? Am I correct in assuming you guys are R&Ding a cold air intake for 96+ 240's. if so, f-ing finally somebody is doing sumthing about it. W00h00!

Post by **whiterps13** » Wed Jul 28, 2004 11:58 am

si1via wrote:hey Injen, when u guys making a cold air for 1st gen 240? If you make it we will come. Haha!

are you joking? they have definately made a cold air and short ram intake for the the s13 for a LONG time... what color is the rock youve been under?

Post by **Injentech** » Wed Jul 28, 2004 11:58 am

Hey guys, we have systems for 89-98 240sx!

The reason I'm looking for a 96+, from time to time, we just want to make sure things are properly fitted to the engine bay. I'm positive that everything is fine, but we do it as a quality control aspect. We want you guys to know that every part that goes out to you, will bolt right on without any problems.

Post by **logoung** » Wed Jul 28, 2004 11:58 am

i have a 97 auto S14 if you guys are desperate and I am in the Chino area.

Post by **logoung** » Wed Jul 28, 2004 11:58 am

i have a 97 auto S14 if you guys are desperate and I am in the Chino area.

Post by **Nismo_Freak** » Wed Jul 28, 2004 11:58 am

Injentech wrote:Hey guys, we have systems for 89-98 240sx! The reason I'm looking for a 96+, from time to time, we just want to make sure things are properly fitted to the engine bay. I'm positive that everything is fine, but we do it as a quality control aspect. We want you guys to know that every part that goes out to you, will bolt right on without any problems.

I had the cold air extension on my 96 240SX... no major fitment issues.

I did however happen to run over my lower part of the extension when it rattled loose :sad

Possibly make a small attachment so that something like this doesn't happen in that one slim chance?

You guys should extend a line of cool air boxes to the 240's... something like that is a nice addition to the engine bay look as well as being functional.

BTW, I have an idea and I'd like to shoot you an email.

Post by **kidzero81** » Wed Jul 28, 2004 11:58 am

Hey Injen, I have a 95! I don't think there is any differences in 95-96. E-mail sent!

Post by **Injentech** » Wed Jul 28, 2004 11:58 am

hey kidzero, email received and replied! Nizmo- I'm always open to suggestion as to what you guys would be interested in!

Shoot me and email or Pm.

Post by **KDashy** » Wed Jul 28, 2004 11:58 am

Stock 97 Auto in Los Angeles area here if you're interested..

Post by **silvia tunner** » Wed Jul 28, 2004 11:58 am

Damn y can't u guys be located in the East Coast

Post by **Injentech** » Wed Jul 28, 2004 11:58 am

Hey guys, just an update! Still looking for that 96+ 240sx 5spd. Suspension is acceptable, but definitely no engine mods.

Post by **Rockenreno** » Wed Jul 28, 2004 11:58 am

I wish I had the time to drive up there and do this

Someone take advantage of this offer!

Post by **NIGHTfall_240sx** » Wed Jul 28, 2004 11:58 am

Injentech wrote:Hey guys, just an update! Still looking for that 96+ 240sx 5spd. Suspension is acceptable, but definitely no engine mods.

just thought of something...

why cant people who already have intake mods go to you guys? all you have to do is take off their current one and put yours on?

or are you planning on dyno'n stock first then dyno'n with your intake? just figured you could get some more people to help you guys out if you let people who already have intake... its a bolt on that takes no more then 2mins to take off and on.. ohwell

Post by **Injentech** » Wed Jul 28, 2004 11:58 am

We need the original stock intake to be on the car.

Post by **Kreukishot** » Wed Jul 28, 2004 11:58 am

will a 97 stock 240sx auto help you at all? has 46000 miles...located in glendale (15 minutes from LA)

email: [email protected]

Thanks,Chris

Post by **Injentech** » Wed Jul 28, 2004 11:58 am

Unfortunately, We need a 5spd-:( If anything changes, I will post it here for you guys to read.

Post by **SauN** » Wed Jul 28, 2004 11:58 am

hey i might be willing to lend you my car...im located in san diego, but will be willing to drive up and just kinda hang around for a day. I won't need to have my car there overnight right?

I have a 96 5 spd. engine is completely stock. Suspension is done up a little bit. I have a cat back exhaust but that's the closest thing I've done for the engine. I still have stock exhaust too.

you can e-mail me at [email protected] thanks

Post by **HashiriyaS14** » Wed Jul 28, 2004 11:58 am

I have a '98 5spd which I'd gladly volunteer if I wasn't 3000 miles away in MD:(

Injen Technology is looking for a 240sx 5spd 96+

Injen Technology is looking for a 240sx 5spd 96+

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums