Injectors

[LeD ippen]

I wanted to know if i could run 750cc injectors for around 300 whp and be okay or is that to big of injectors? this is on a rb20

HKS GT2510
Pod
FMIC
Walboro
Nistune
Crank Collar
ARP Head studs
3" All the way back
Nismo Fpr

[Yellow4g63]

Yes u can what kind of injectors? you need to get the lag time info for the injectors when ur adjusting the K in nistune.

[LeD ippen]

I am going to buy some deastchwerks but just wanted to know if i can go that big. just like to buy once and not have to upgrade later

[Yellow4g63]

Search around I'm not sure if there 750 is a quality injector. I'm running 800cc on mine. Just stay away from blow through with the lightning maf and you will be good lol.

[StricNyne]

i ran 1000cc for like 200hp (long story). but basically a bad timing map) a lot of people were telling me it would get s*** gas or not idle but with my haltech it idles at 900rpm and kicks a**, and thats with a super rich cold start fueling map

[Cjmartz2k]

i ran 1000cc for like 200hp (long story). but basically a bad timing map) a lot of people were telling me it would get s*** gas or not idle but with my haltech it idles at 900rpm and kicks a**, and thats with a super rich cold start fueling map

Agreed. I heard that all the time over on skylinesaustralia and it made me want to punch babies in the face every time I heard it. Does a 900hp vehicle use any more gas at idle than a 200hp car? No. Then why would they be any different. If you have good quality injectors that idle good in a 900hp car, they will do the same in a 200hp car. End of story. If anybody wants to argue otherwise, send them this way and I'll inform them of what kind of internet only knowledge retard they really are.

[LeD ippen]

Search around I'm not sure if there 750 is a quality injector. I'm running 800cc on mine. Just stay away from blow through with the lightning maf and you will be good lol.

What injectors do you suggest? I trying to get something around 750cc. I'm shooting for 450whp later on with around 75-80% duty cycle. I want to run blow through with n62 maf but i dont know if it gonna last like that and i can't go map setup with nistune. well not yet

[Yellow4g63]

Try RC injectors, SARDS, only 2 that come to my mind. Anyone else care to chime in on injector experiences?

[Cjmartz2k]

+1 for RC injectors.

Also Nismo/Tomei (same same) makes good injectors but they ain't cheap.

[StricNyne]

i run precision, no beef with them at all !!

[Carl H]

hate precisions...they are a pain to tune for, especially the 880's; non linear spray pattern.
I've run rc 550cc injectors in my 20, worked great...super idle and part throttle driving characteristics.
I currently run greddy/denso 720cc injectors in my 30, and they were also on my 20.

All running on a tuned stock ecu...blowthru z32 et al.