Injectors not firing... HELP

[ILikeMy240sx]

Hello all,

Just finished my 2nd rebuild and about to fire her up but running into problems...

None of the injectors are getting signals to open up. I used one of those injector test lights to verify this and none of the injector plugs caused the light to go on...

Also, for some reason the ECU is throwing #11 (Camshaft Position Sensor)

Why do you think my injectors are not getting any signal to fire? Would a CAS cause the injectors to not fire?

Thanks!

[ILikeMy240sx]

Did a bit more testing. I took the CAS out, turned the key to on and started spinning the CAS.

All the injectors are clicking when I do that which means the injectors are operating. Also, I took the plugs out, grounded it to the block and the same thing.. I am getting spark...

When I put everything back together, the injectors still get no signal to fire... WTF!!!

Plz help...

[ILikeMy240sx]

Problem solved... one of the wire on the CAS plug was loose..