Injector O-rings???

[damesta]

Just wondering if there is a cross reference for the injector o-rings on the rwd ca18det? Thanks for the help.

[NeedCAforS13]

bring yours up to autozone and match them up... DON'T use toyota bosch ones! and don't ask why I know that:( Pulsar ones don't work either if I remember correctly. Its just easiest to match yours to a place that sells o-rings. They just had a big box of them behind the counter and we matched them up perfectly!:)

Sean

[damesta]

That would be easy if I had any, my engine didn't come with injectors or o rings, do you have any old ones you can send with the injectors? I guess I would need one top one and one bottom one, that is, if they are different.

[NeedCAforS13]

yeah I think I have my old ones laying around... i'll throw them in together:) There are actually 3 rubber pieces to replace, but only one is an o-ring. The other two are something you can find at your Nissan dealership, and are pretty common between all nissan's top mount injectors...

Sean

[float_6969]

Sean, do the pulsar ones not work? I hope they do because that's what I bought....

[NeedCAforS13]

I didn't use them, but when I was in the junkyard, I noticed the Pulsar uses a VERY different fuel rail than we do. It connects to the injectors with a short lenght of fuel line rather than just attaching directly to the injector. I should add that the JDM CA18DE rail is identical to the DET rail, its just the USDM CA18DE rail that is tiny... It might work, but I would be skeptical!

Sean

[float_6969]

I guess I'll find out when I get my car back. We're painting either today or tomorrow morning.